Awesome I thought they were lovells by the look of them just wasn't sure. Should be here next week and then it's finding time to install them
Just tap it in just tappy tappy tappy
Printable View
Awesome I thought they were lovells by the look of them just wasn't sure. Should be here next week and then it's finding time to install them
Just tap it in just tappy tappy tappy
sold it sold it now to find my new toy to mod
Picked up a full ally cage for the swb, it's the first cage I've found which takes up the whole swb roof. Stoked! And I got it from a garage sale!!!
Tappin
Welllll had a poke around and found a bit of out of control tin worm that'll need attention
Attachment 24191
Slap N Tap ;)
Yikes that's no good. Needs a skin graft hahahah
Yikes alright the more I looked the more I found. Not as bad as the big hole though. So out with the rust killer primer and paint and a lil bit of big ;) It'll do for now until I work out the best for me and aggie!! Once that tin worm sets in there's not a lot of hope! I don't wanna start cutting and patching. Got a trana sitting in the shed waiting for some TLCQuote:
Originally Posted by Winnie
Anyway slow the worm down for now
Attachment 24192
Attachment 24193
Attachment 24194
Attachment 24195
Attachment 24196
Attachment 24197
Attachment 24198
Slap N Tap ;)
Found out I had a dud isolator.
Replaced with a ctek d250 dual.
An hour and half of fault finding with (yendor's help) an hour and half for the install. Will move it into the glove box after my trip. And post some photos when complete
All works a treat.
whao mate once that tin worm enters thats it buddy no stoppingQuote:
Originally Posted by growler2058
it now ,just go alon and tap gently along the roof line and yoiu,l know
where it is ,check your pillar posts ,mmmmmmmm dosnt look good
lmaof time to think about a gu ,even if you gave it a heart transplant
be better than worring about poor old aggie
Mmmmmmmmmmm thinking thinkingQuote:
Originally Posted by roofy
True mate! Didn't think of that.... :)Quote:
Originally Posted by Winnie
Jas
Watch some stranger drive my girl away
haveHAVE ANOTHER BEER AND THINK OF THE POSITIVESQuote:
Originally Posted by healy
Following Paul's (RLI) instructions, fitted my pillar pod and Autometer Boost and Pyro gauges. Electrics all hooked up (and car not on fire :)), grommet in the firewall, now just waiting on the Beaudesert exhaust and a couple of other bits to arrive so I can hook the gauges up to something.
Bought a carton of Crown to celebrate :)
Got new boots, rims and spare for the girl yesterday. Mickey Thompson ATZ 4 ribs 285/75/R16 and 16x8 black discovery rims. Took the front mud flaps off too - they got in the way.
Jas
Piccies?????????Quote:
Originally Posted by lorrieandjas
Don't stroke it, TAP it!!!!.....
put a vl alternator in the old girl.
Hi mate. Some pics below:Quote:
Originally Posted by Clunk
Attachment 24212 Attachment 24213
Attachment 24214 Attachment 24215
Jas
broke 2 exhaust rubber mounts yesterday teaching my brother in law how to 4wd i'll replace them on my next day off
looking good Jas
I miss my truck! It's home alone.
Working away from home at the moment and got the work's gutless 3l TD Hilux as my daily driver.
And, NO, I won't be showing you another pic of me kissing a Toyota badge!!!!
Not many more sleeps to go. lol
Thanks mate! I'm really happy with them so far.Quote:
Originally Posted by 93patrol
Jas
Mate I drive a 2.4L 4 banger Hilux for work, I think the Patrol would drag it offQuote:
Originally Posted by DX grunt
Wired in some fully functional rear tail light's today :)
I went and looked at it sitting in the garage while I'm waiting for the FMIC and pipe work to turn up, decided it was too hot to pull the bulbar and grille off in preparation so went for a swim instead.
Replaced the radiator with a copper three core
Had too many times was running very hot.
Off to the holland track in the next few days
Where did you get your radiator mate, been thinking of upgrading mine to a copper 3 core!Quote:
Originally Posted by Dinger
Nation wide auto parts
That are in bayswater. I found them on eBaylink is attached:
http://stores.ebay.com.au/autoelectr...id=p4340.l2563
I will let you know how it goes on the trip if you want.
It was $475 picked up
No hassles
Hello,
Pics attached as promised earlier, it's a start.
Looking good mate!
Did nothing at all its running like a swiss watch. and if it aint broke dont fix it, cooooooool runnings man
Climbed underneath to fix a loose exhaust found the muffler falling apart so time for a newby when I finish the weekend night shifts
Just tap it in just tappy tappy tappy
Finally got the Autometer Boost gauge plumbed in, Pyrometer wires hooked up ready for exhaust fitting on Monday.
Replaced both batteries in the GU. Both died at the same time grrrrr
Tap, Tap, Taparoo
Re-seated a tyre on the bead, put the new HID globes in my spoties, mounted my new shovel carrier and put a one way valve into the washer line on the rear door to stop it leaking every time I go up hill.....
Sent from my iPhone using Tapatalk
Cleaned her inside and out lol
Drove to Lorne to compete in the Pier2Pub swimming race.
How'd you go mate?Quote:
Originally Posted by Apollofish
Jas
Washed all the bugs and dirt off it then drove 6.5hours back to melbourne! (Bug splatter looks better on a clean trol)
Trying to find my time in the race results but shows DNF (Did Not Finish) at the moment. Must be still updating as I certainly finished it.
When you finished we're the officials and spectators still there? Lol