Printable View
I'm after a 12 foot tinny cartopper with a 15 hp motor.
If it's on the trailer , that no problems . I'll pick it up if it's close
Anyone interested with one let me know.\
I need one to put on top of my truck for a trip up north next year.
Just to add , if any one has roof racks with a roller at the back..........let me know
Anyone????
Holly shit any one???
EDIT: hello everone with a tinny
whatttttttt a whole 15 minutes was tooo long for a reply!!!!?????? hahahahahahaQuote:
Originally Posted by NissPat
Sorry mate can't help ya....... as always!!!!lmao
Good News is... I have a 12 foot tinny, 15 Johnno, Folding trailer, Sounder, Beach wheels and roof rollers for sale
$1,500
Bad News is... I live in Rockingham W.A.
oooh you're such a tease ET!!!!! lolQuote:
Originally Posted by the evil twin
I also have one for sale and I'm in Geraldton
ooooh I say, this is just like waiting for a bus................................ hahahahaha
Quote:
Originally Posted by the evil twin
Ok, I think you guys need a holiday on the eastern side of OZ...much better here...LOLQuote:
Originally Posted by gec
Hahhahahha, Just noticed that...lololololoQuote:
Originally Posted by clunk71
Twas a good night...lol
BUMP!
Hi wanting to buy a starter motor for 1987 MQ nissan patrol diesel urgent contact me via PM if you can help.
It is always a good idea to post up an introduction before asking for anything mate, gets everyone on side.
where are you located? 12V? I have entire SD33 engine 24V setup, was reconditioned a few years back, did just over 30,000km, and is now sitting on a pallet in the shed. came out of 1981 MQ 4speed.Quote:
Originally Posted by Raydar PC
firstly sorry i forget the introduction I am just a newby to this .... any just bought my first patrol need to fix a few things before rwc and rego
cheers and once again sorry to everyone on here
I am in queensland and it is a 12v and how much for your sd33Quote:
Originally Posted by GQRD28T
Not a problem mate, it's all goodQuote:
Originally Posted by Raydar PC
Hey Plas i'm good for a bit of a spit mate but not sure that will do the job. I have been known to lay a reasonable weld that has stood the test of time but i aint no Boiler Maker mate. If i can help just yell out bud.
I have been wanting to buy one hehehehe
I would likely be able to borrow my father inlaws for a day mate he has a 200amp Mig that i did my rear bar and roof lights with. Sure he would not mind?? I think? lol
I agree, see if you cant find a Pro, if not then between the two of us we must be able to get it done. We aint no Dills.
****No smart comments from the rest a ya. :p
any one got contacts to supply and fit turbo in SA, Adelaide, thanx Barry
Hi mate, I haven't got any contacts over there but if you are considering doing this yourself then have a read of this below...
http://www.nissanpatrol.com.au/forum...-to-a-N-A-TD42
Where in Qld? I may be able to helpQuote:
Originally Posted by Raydar PC
Tim
Been changing things around and have ended up with switches moved to allow for more mods and the blanks have holes in the wrong places.
Need 3 if I can get them.
Also after an armrest for a DX, previous owner must of stood on mine as its that bad.
Hoping I get lucky.
Thanks,
Macca
g`day mateQuote:
Originally Posted by macca
are they the oblong ones your after?????
if so i have a few after putting switches in my dash
PM sent
Thanks
Macca
Paul my phone might accept photos but I think it's barred, the insert / blank with the 2 push buttons needs replacing it will have a larger push button / pot in the centre so should be sweet to recycle what you have. Its that size I am after,
http://i254.photobucket.com/albums/h...s/IMG_3220.jpg
Thanks Macca
thats the ones i haveQuote:
Originally Posted by macca
pm me your address and ill post them to you mate
hi all
As stated in the title i'm after an intake manifold for a td42
Cheers
Benny
I have the top pipe and flange you can have for nothing but not the actual manifold unfortunately.
i assume u are after a second hand one and not a brand new one?
hey fellas im in need on a few parts for my car for rego
im chasing a coolant overflow bottle,
front blinkers both sides,
a in dash vent surround for the lhs vent
a lhs lower trailing arm
a drivers seat,
few odds and bobs
the screw for the jack cover plate, a lever for the middle row seats and a window winder
located in lismore nsw 2480
all parts for a 1989 mav 4.2 carb
Do tell where you got the bargain. Cheers rellbellQuote:
Originally Posted by Cadbury
Cheers AB I just after manifold I'm going to cut the top of it out and make a custom plenum
Todd, How much is a brand new one??
Intake manifold Todd.
Tony
hahaha Thanks Tony Didn't read it properly............sorry BennyQuote:
Originally Posted by YNOT
Ive got this non turbo TD42 manifold if anyone wants it too...No charge, just postage.
Inlet or exhaust?Quote:
Originally Posted by AB
Tony
Just the exhaust.
Am after a bonnet with the scoop in any condition, for a little experimenting.
I'll call wreckers next week, but no-one has one laying around, by any chance ?
PM me here...
cheers
posted today mate
hope they are right
Nicely done mate, good to have a sound network on here!!!