Got the welding helmet in the deal, a fairly new packet of electrodes and a new coil of wire for the mig, in the price.Quote:
Originally Posted by Cuppa
No eye jokes, Cuppa.:smileyvault-cute-bi
Printable View
Got the welding helmet in the deal, a fairly new packet of electrodes and a new coil of wire for the mig, in the price.Quote:
Originally Posted by Cuppa
No eye jokes, Cuppa.:smileyvault-cute-bi
well now you have two welders one you push the other you pull lol
Gasless is a poor weld IMO but a small bottle is cheaper and will do a few jobs
One box of beer and one box of cider . Majority of this is for the meetup this weekend at Nissheads place . Must remain hydrated .
2 x new Cisterns and Seats for the house crappers.
Constantly fixing the old ones was giving me the shits.
The kids would take the piss and I'd flush so much I had to take a seat before I blew me lid and went round the bend.
All sorted now... feels so good it makes me want to take another dump
More stock for my leather working got ordered. Also a new Wolverine model compound bow was ordered :)
Another lee production lead melting pot for my cast projectiles and jig head hooks.
My last one went walk about after a falling out with my shooting / fishing mate along with $1000 worth of custom bullet molds.
New OEM clutch hose for the TD42 and new oem thermostat & thermostat housing gasket ordered for the TB42E........................ How exciting is that hey woooohoooooo
:groupwave::Yahoo!::animierte-smilies-t:049::toot:
Ctek 250 dual for the new work truck but I'm going to make it easily removable to go in the camper when we go away.
My little fan arrived today brushless and only draws .06 A.
Pushes out a bit of air as well. 15-30 CFM
Ill fit it to my Engel to keep the motor cooler,
That's a pretty cool (pardon the pun) fan TD. How much did it set you back?
http://www.ebay.com.au/itm/321369913...84.m1439.l2649
Cheap as chips MN, hopefully the Engel will be a tad more efficient
It will make it like the model after mine which they call "turboed"
this will be 2nd fan I've fitted
Also bought a set of these valve caps they are set at 36 PSI they say when it drop to 35 the green indicator will turn red
Saves getting down and checking its a visual just walking around the fourby, I'll see how they go
Quote:
Originally Posted by threedogs
But I was led to believe that Engels where the beezneez, so surely a fan isn't needed lol
so are they the $30 ones, the $6 ones or the $2 ones?.....................Quote:
Originally Posted by threedogs
@ Clunk it makes the older style Engels a bit more efficient,
and can cycle longer, Later models with the LED readout had a fan as standard
and were called Turboed, pull one apart and its just a computer fan pointed at the motor
I brought my engel in 92-93, still going as strong as the day I purchased it,
combined with the digital temp controller its the best its ever been
As for the caps I think they were the $6 jobs, just a gimmick if it works it works
I prefer steel caps so we'll see how long they last
Hmmm, a 2014 Nissan Patrol ST "Titanium Edition".....fresh off the showroom floor
one of the guys in our club over here just bought one, very very nice.Quote:
Originally Posted by Heavyweight
My awning came today, 2.5 x 3m, keen to put it on tomorrow after work.
but thats a Y62 and the colour is Titanium........... isnt it???? lolQuote:
Originally Posted by Stropp
http://www.bluescrewtentpegs.com/
Never heard of this lot until today. Gunna give their product a try.
Rossco
I've got a couple for my awning , they work really well ,Quote:
Originally Posted by DX grunt
They reckon you can winch off three of them together.Quote:
Originally Posted by DX grunt
supa peg do a similar peg as well.
Just went tyre kicking and looking , opps !
Attachment 54638
Picked up a heavy duty spring to fit my telescopic sand flag to, same as on my big antenna spring. That should stop it from flopping all over the place.
Not so much bought but gone back to a crapple...
My Xperia z1 was to the point of no more. And with 4 months still to go I'm on the wife's old 5 until then.
The only thing I like is it's size. That z1 was the last big phone I will buy.
Next will be a s4 mini or an s5 mini if it's out by that time.
Haha old iPhone 5..... I still use a iPhone 3G. A 5 would be like new.Quote:
Originally Posted by biggqwesty
This morning I picked up this Coleman fold up Barby for free.
Was in a shed covered in dust, the person I got it from hasn't used it for a few years and was going to throw it out.
Just finished cleaning it up. 1/2 hour work and looks almost new, also got the hose & regulator.
:cheers:
Cool pick up ,,check burner knobs for leaks with soapy water, if you see bubbles
,turn gas off undo front plate on burner controll knob clean and re fit with a bit of vaseline on it.
Dont want it blowing up in your face
Thanks for the advice TD.
Will check that out, then get my wife to light it. LOL.
:cheers:
lol, check the life insurance first :)Quote:
Originally Posted by ova50
http://www.ebay.com.au/itm/4-32mm-Ti...id%3D100102%26
picked up this at a great price, very handy for any panel work and switch installation
just ordered my redarc boost/pyro gauge. so i can install NADS
How much? I picked mine up this morning. When ringing around to get prices I found them to vary. Surprisingly the most expensive was direct from Redarc themselves. They wanted full RRP plus something like $70 freight from Adelaide to Ballarat which worked out to around $455! Buying through one of the local Redarc distributors got me one for $327 + gst. They matched ARB’s price & were able to get it quicker than ARB because they got it direct from Redarc, whereas ARB have to order through their own warehousing system, who in turn get it from Redarc.Quote:
Originally Posted by jonez911
All up I paid $685 for the boost/pyro, the oil pressure/water temp & the ‘enhanced lighting controller’. I’ll show them to my wife tonight when she gets home & I know exactly what she’ll say.
“Is that it? Doesn’t look much”. When the pillar pod arrived I got “That’s a pretty expensive little piece of plastic” (& she was right!).
They do that Cuppa to protect the distributors. The last thing they want to do is steal business from them.
Do yourself a flavour John and buy a real one from All Tools or somewhere like that. I bought one of them, from china, and it went blunt real quick. But they are a real handy drill bit though. Which reminds me, I need to get mine back off my brother...Quote:
Originally Posted by threedogs
have a real one thanks only need it for plastic now and again so it will suit my needs
as it goes to 34mm my REAL one only goes to 20mm I think lol
Quote:
Originally Posted by Cuppa
brought straight from redarc for $405 delivered to vic.
Ahh for plastic it will be fine.Quote:
Originally Posted by threedogs
Sounds like it's only needed on a GU.Quote:
Originally Posted by mudski