I got one very similar from BOC around $72 inc. GSTQuote:
Originally Posted by mudski
Graham
Printable View
I got one very similar from BOC around $72 inc. GSTQuote:
Originally Posted by mudski
Graham
On the VW modification side, a friend was involved with fitting the throttle body injection from a 1.8 Camira (Pulsar would be the same and would make it a little bit Nissan) onto beach buggy. Machined down the distributor to fit, bolt on the throttle body and some sensors (I think they use oil temp instead of coolant temp), lots of power & better economy. They found the ECU from an automatic was better than the one from a manual.
Graham
Might have to break my mig out and start using it a bit more.
Cost me $1400 so its a heap of $$ just sitting doing nothing.
Now BOC have a fair price for gas, I do like using it though
I must admit, no chipping slag of wire brushing welds
This style easy out arrived, hopefully Ill never need them
There are quite a few 10 second street legal Vee Dubs going around, or at least hiddenQuote:
Originally Posted by GeeYou8
only to be driven on club days
I should really get my self some easy outs. Don't have any at allQuote:
Originally Posted by threedogs
@ Lucas you may never use them but you'll be glad
you have them if a bolt breaks, I have both styles
Some steel to mod my ARB Deluxe Steps into a slider/ step. This will be interesting. Lol
Everytime I use an easy out, its not so easy and I bust them. So then the welder comes out...Quote:
Originally Posted by lucus30
You know this will need it's own build thread.....Quote:
Originally Posted by growler2058
and the finished project if the missus takes overQuote:
Originally Posted by taslucas
Attachment 64992
watch out if you drive on the beach at goolwa going to the mouth
Attachment 64993
Scangauge ordered..