Installing WRX front mount intercooler with 3" pipe to GQ

So you already have his spare and will give it back?

Sent from my iPhone using Forum Runner

Quote:

---

Originally Posted by Bloodyaussie

Thats not hard

---

Entirely up to you ba, ill give you the brand new tyre too if you want to sweeten the deal.

Can't thank you enough mate, legend !!!!

Drew, ba has the arb deluxe winch bar which sticks out a little bit more to accommodate the highmount then mine.

Quote:

---

Originally Posted by Drewboyaus

So you already have his spare and will give it back?

Sent from my iPhone using Forum Runner

---

No, ba wants a spare 33" tyre for his car.

Quote:

---

Originally Posted by AB

So bloody close but no cigar!!!

I want the ic as much as possible behind the grill regardless of what bar goes on.

Took off thermo and support rail, relocated horn, moved ac piping, that piping was easy to relocate.

Pushed the condenser back and I am about 210mm now...10mm off this bloody highmount fitting on the bar.

Had to re do the piping on the cold side because its so far back now so next week ill mount the ic again and have a look.

So close!!!

---

I have just measured my Millweld bar and have 350mm clearance.

Quote:

---

Originally Posted by Winnie

I have just measured my Millweld bar and have 350mm clearance.

---

That's good distance. That would fit a highmount nice with no grille cutting.

Tried to tag you in a FB post today AB, there is an ARB high mount winch bar for sale somewhere in Yarra Valley.



Attachment 48254

Sent from my iPhone using Forum Runner

Quote:

---

Originally Posted by Drewboyaus

Tried to tag you in a FB post today AB, there is an ARB high mount winch bar for sale somewhere in Yarra Valley.



Attachment 48254

Sent from my iPhone using Forum Runner

---

Yeah I spoke with AB and I was chatting with that guy via PM but apparently Jonno"s offer stands. Very generous. Nice work.

He's a good man Johnathon. I'm also giving him a brand new spare tyre and rim and some hugs so he's a happy camper as well.

I've had enough of this intercooler...lol...I'm done!!

Moved it all back and it's all finally mounted. I hope this never has to come off ever again, I might have to write a manual on how it goes together with the amount of tweaking needed to fit this!

Just need the grille on..

I managed to get 205mm overall from the ic to behind the plate.

Much neater pushed back now, flush behind bonnet.

Cut grille, paint grille, brackets and ic....job done!