Its a kinky 3 way between you me and benny
Printable View
Its a kinky 3 way between you me and benny
So the weight loss is not going so well then???.....................ohhh, you were talking about Tank!Quote:
Originally Posted by Dhuck
Tony
Fair enough mate, I'm going 2 have 2 get my as! in gear and put my 4 inch back in, but will do it all legal this time around :)
Ohhhhhh ... and there it is!!! Getting bagged by the forum "good guy" ... you happy with yourself dhuck??? You've corrupted a true gentlemen .... you should be ashamed!!!!! lmaoQuote:
Originally Posted by YNOT
Legal, schmegal ... when's the last time (honestly) you got pulled over or know someone who did??? (who wasn't driving an obviously, ridiculously illegal truck by the way). I know of a fair few trucks now that are at least, if not bigger than mine, with bigger tyres, cut wheel guards etc, etc who have never been hassled ... I'm not saying break the law, but a 4-5" lift done well with 33's and without all the "monster truck" setup will attract very little attention me thinks ...Quote:
Originally Posted by toddrhind
We seriously need to talk a NSW trip Todd ... me? I'm more than happy to drive down and back even for a 2-3 day trip (days driving either side is no great drama).
What did Bart say " it wasn't me"Quote:
Originally Posted by Bigrig
The only reason I would do it properly this time around Scotty as its getting harder 2 find a mechanic that will turn a blind eye 2 a lift. I have been pulled over on numerous occasions from the boys in blue for random rbt and they had never questioned the lift, not even the fact i don't have flares on and my tires stick out noticeable :)Quote:
Originally Posted by Bigrig
Mate if i had the spare dosh at the moment i would be heading up your way now 2 raid your beer fridge.....I mean for a trip :):):)
Beer is cold, the welcome is warm (ahhh schucks!! lol) ... door is always open mate ...Quote:
Originally Posted by toddrhind
Plenty of blokes up here who'll accommodate your request to install a big lift, big tyres, etc, etc ...
Very nice bar and light setup there Scotty, a new or modified bar in on my wish list at the moment along with about 20 other things.
time to update with the new rubber under it.
Thanks champion!!! Just fitted the new wheels and tyres also - looks a dead set treat!!!! -23 offset, so with the wider tyre gives it a heap better looking stance and really changes the look from the front end, but will post a pic of that tomorrow in daylight.Quote:
Originally Posted by The Dogman
Attachment 5965
I likey very much, what wrong with taking a photo now mate, still heaps of sunlight over here...haha
Haha ... I'll pop over then and we can share a coldie whilst we take a photo before the sun goes down!!!! lmaoQuote:
Originally Posted by The Dogman
Here's one I took in the dark ... not much chop, but gives it a great stance now ...
Attachment 5966
Where's the number plate?
Tony
Haha .. was wondering if anyone would notice!! It's sitting on my dash at the moment!! Gotta come up with a way to mount it ... thinking piano hinge over the winch mount slot so it covers the slot, but can be swiveled away when I use the winch ..Quote:
Originally Posted by YNOT
A slim line number plate might be the go to suit your slim line bar.
Tony
Not to mention the slimline driver!!! lmao ..Quote:
Originally Posted by YNOT
Yep, you're spot on ... think I need to order a new plate ...
should have tried the 35's on....... you know you wanted to!
just wait till you fit a set of sliders and the white lettering outward.Quote:
Originally Posted by Bigrig
Yes ... yes I did ... glad I didn't!!!! lmaoQuote:
Originally Posted by Peacemaker
I have tried telling him in the past go 35's. Would look tough.
Wouldn't fit ...Quote:
Originally Posted by Dhuck
They would only scrub a little bit lol
Yeah .. scrub a little bit of the roofline!!! lmaoQuote:
Originally Posted by Dhuck
You have an angle grinder, you can make them fit!Quote:
Originally Posted by Bigrig
Tony
You're not helping the situation old mate!!! lolQuote:
Originally Posted by YNOT
I wise man (tall, slim, mechanic type from Logan way) once told me "don't see the point anymore, tell me where I can't go with 33's that I could with 35's. ..." - for the life of me I can't recall his name ... you'd like him though, he's very similar to yourself!!!! lmao
Yes but he had twin lockers.Quote:
Originally Posted by Bigrig
Tony
Hahaha ... lockers, schmockers ... two lockers versus one locker with a good LSD and a brake pedal ... what's the difference when one knows how to drive!!!! lmaoQuote:
Originally Posted by YNOT
Quote:
Originally Posted by Bigrig
hahaha, one that knows how 2 drive would only use his good LSD and brake pedal and not need lockers at all :)
I used to think along the same lines mate but heading down some deep ruts worn out by 35"s and watching Timbo and other vehicles cruise through on 35"s and myself try and bash through scraping the housing the whole way through has lead me to believe I really do need 35"s in my area unfortunately...Quote:
Originally Posted by Bigrig
Unless I mount a snowboard that runs from the front to rear housing and you can get enough speed up to grind your way through then 35"s are a must for my area....LMAO
YOUR RIGHT MATE BUT WHAT HAPPENS WHEN THE RUTTS GET DEEPER FROM THE 35"s ??AH OF COURSE YOU GO TO38"s ?its a never ending drama lolQuote:
Originally Posted by AB
Very true mate, then I go out and buy a tractor...LMAOQuote:
Originally Posted by roofy
A Nissan Tractor I hope......hahhahahahahahahahaQuote:
Originally Posted by AB
A couple more shots... In daylight!! lol
Attachment 5973
Attachment 5974
Attachment 5975
WOW Scotty, It's looking good.
I can't believe have much it has changed from when I last saw it.
All you need now is 35" tyres..... (just kidding).
What is it with 35's!!!! lmaoQuote:
Originally Posted by Yendor
Thanks mate ... been a bit of a transformation happening externally over the last month or so ...
Thats the sh!t Bigus, she looks tough as mate....... love it
bugger it lets just put a body lift in and chuck a set of 37's under it
By using the word "lets", you're implying half accountability for effort and cost ... what a lad!! Thanks mate ... I wasn't even considering 37's (nor a body lift for that matter), but seeing as I'm only paying for half and you're picking up the rest of the tab, why wouldn't I!!!! When do we start?? lmfaoQuote:
Originally Posted by Dhuck