So who organised NT to transport the bar? I assume Milweld eng as they are footing the bill, so Dave and Murrie at Torq4x4 really have nothing to do with it.
Printable View
So who organised NT to transport the bar? I assume Milweld eng as they are footing the bill, so Dave and Murrie at Torq4x4 really have nothing to do with it.
I hope he doesn't scratch it. :DQuote:
Originally Posted by daggy
You know how much Murray babies that truck LOL
yes Milweld eng organised Northline trans and they are footing the bill for a new bar. and your quite right Dave and murrie at torq4x4 are out of it as i said before unfortunately they are the innocent meat in the sandwich.Quote:
Originally Posted by NissanGQ4.2
speaking of Torq4x4 i had a very excited Murrie on the phone to me as i was driving home to day (being sunday and al) Milweld had responded to their emails and have a bar on hand that they can send up this week. Sadly though this one has a jerry can carrier as well as a spare wheel carrier the one i ordered only had a spare wheel carrier,,,,,, guess i will just have to suck it up as milweld are throwing in the jerry carrier for free to make up for the inconvience that Northline has caused... BUGGER!!!! LOL
quick side note to this Northline transport has been chasing my wife trying to get her to send all of the frieght from the company she works for through them,,, Northline has been touting the line that they garantee a 2 day turn around and delivery from brisbane to melbourne and visa versa INCIDENT and DAMAGE FREE ROFLMAO she is going to ask them to clarifie their definition of2 day turn around & damage free etc ROFLMAO
already warned Murrie if mine is still in the shop on saturday the 22/12 i am taking his to Janowen then call to check phone receiption from the bottom of the XXX tracks LOLQuote:
Originally Posted by Yendor
HAHAHA, that's so funny :)
yes would love to be listening to that [phone call when does her please explain voice LOLOL
Far out, what a drama! Hope you get it sorted soon mate, I know the boys will look after you
That's not a bad idea.Quote:
Originally Posted by hekarewe
I could find out how bad a driver I am really am then, in Murray's truck of course. ;)
oh i am getting look after by the boys at Torq and sc oring a free jerry can holder of of milweld to boot so allls well that ends well lolQuote:
Originally Posted by Nisshead
Everyone gets a turn driving his truck first to roll wins
macca we swap hALf way and see who rolls first LOL you nasty little muppet LOLOLQuote:
Originally Posted by macca86
Then burn it and dance around it so he can upgrade to a gu. Green machine looking good mate
Lookin good! Keen to see pics Cheers.
green machine will look better when she comes back from torq champing at the bit just quietly lolQuote:
Originally Posted by macca86
now you have no excuse not to come good on the challenge you dished out to bigrig some weeks ago lmao.
The two big boys fight to the death hekarewe vs tank winches aloud or pure driving ability
now that could really get ugly as his is broken agian be afraid to lay that one down on bigus he break more of the tank then we would have to take turns at towing tank home LOLQuote:
Originally Posted by Ben-e-boy
Must of taken i bit of effort to bend your rear bar you would hope. Hope it all goes well.
not really as there is no structual strienght untill it is fitted, so if you drop it on one corner at the right angle bending it would be dead easy remember they are designed to be hit from behind when attached to the vehicle not being dropped by some mong in a frieght yard who couldnt give a sh*&t.Quote:
Originally Posted by scotty83
I was talking to my Dispatch manager this morning about the issue you had with Northline. He said look at this, shows me 2 different consignment notes for 2 different orders that had various amounts of cartons on them each, both orders the customer rang up saying they are missing a box, wanting 2 know where the box was ( was signed for short ), he traced the freight and both lot of missing boxes ended up at the freight company's depot in another state than what it should of been in!Quote:
Originally Posted by hekarewe
Don't think any freight yard gives a sh!t
Quote:
Originally Posted by macca86
only the loser will winch.
have you had the replacement fitted yet. would love to see some photos
photos will be coming as soon as i get her back from torq thats of cause if torq dont do the deed first on their face book site lol
right finally got my baby back from torq4x4 tonight new bar exhaust chip draws and reduction gears i must say the the vrrrroooooommm factor from the chip was awsume on the way home LOL as for the rest tomorrow will be trail day the bar looks very trick and draws look fab huge well done to dave and murrie at torq going to load photos shortly but will tak better ones tomorrow in the day light.
as promised here are the pics from tonight at home not the best but they will do till i get some good ones tomorrow in the sun light
Schmick. It came up a treat. Rear bar looks good. What trails you hittin up?
tomorrow we hit Janowen 4wd park to test out the new chip and reduction gearsQuote:
Originally Posted by nissannewby
as promised some photos in day light after a short out to Janowen 4wd park
Looks very spangly indeed mate, very meet n tidy
Must be a GU thing...................... bonnet being up after a days play
Yeh looks ok for a GU :)
bonnet needs to be up to run compressor of batteries SOP.s LOLQuote:
Originally Posted by NissanGQ4.2
Looks better than when I saw it at 2p on Friday, pieces on the floor and a dead battery. Where are the action shots and did you make that hill near the campground?
no i didnt even try it it was to wet and slimy to be doing that by self,,,, i did go up to the look out and the new gears made climb a lot easier but it was a bit hairy coming back down slip a few times coming down trying to find the happy gear that hold on engine and let the wheels turn quick enough so it didnt start to slide all in all the chip and the gears worked a treatQuote:
Originally Posted by daggy
finally got the boot finished in hekarewe with torque 4x4 installing the last components the wire shelf and devider then a visit to my good mate over at A Grade auto electrical to move trailer plugs from under the rear bar to the back of it see the pic and then adding 2 accessory plugs in the rear seat area so number one daughter can play her dvd's in the back with out leads all over the car and then my bit of installing the fridge onto the fridge slide using all stainless steel fittings unfortunatly i cant count and ran out of stainless steel d shackles so will have to drop into masters through the week and finish it all. and put up the insulation on the side windows rweady fro cape york in 4 weeks but whos counting
Look at you go mr fancy pants
i am living out of the back of this thing for a month with the camper,,,,,,,,,, you bet i am going a little bit fancy LOLQuote:
Originally Posted by Ben-e-boy
What's left to do on it now? Who are you travelling with?
whats left major service before i go and wheel bearing on the camper and a light bar i acquired yesterday to be mounted also move the CB and install new stero to go inQuote:
Originally Posted by Ben-e-boy
will be travelling with 3 vehicles from the river city club and my sister is hiring a 4wd ex cairns to drive up with me as well and will have my brother as her passanger neither of my sister or brother have ever been 4wding so should be funny to see their reactions
so what were you buying at tent world on sunday looks like its well set up . lol hard to miss your rig when i was passing on way to jcar
picking up a new set of handles for my old waco fridge 11 years old and still working like a charm LOL also looking at a some new chairs for the trip as our old ones are starting to look a little worse for wearQuote:
Originally Posted by megatexture