No sorry don't have the manual to quote a page.
Nissan gen manuals can have a descriptive/picture page for the layout of such stuff in their manuals.
Printable View
No sorry don't have the manual to quote a page.
Nissan gen manuals can have a descriptive/picture page for the layout of such stuff in their manuals.
Thanks anyway mate
Col
Hope this helps.
Best I could find with what I have.
Happy Easter.
Drive safe.
Robo.
left click pic to enlarge
i had the same engine malfunction light come on. spoke to a mate with the same model (2007 crd 3.0) and he had the exact same thing happen. went to nissan to go on diagnostics. crank shaft sensor....quoted $180 for sensor.. i just told them to reset the warning light, as i have not noticed anything unusual as far as performance or fuel economy. so far so good!! my mate has done the exact same thing.... i can see a pattern here!
hope this helps
i have had mine reset 3 times i have an 07 model . hasn't come on for 18 months now ,keep my fingers crossed :)
Robbo,
thanks again . Where's the diag. from? Don't think I've seen it in the manual but I spend a lot of time looking in all the wrong places.
Somebody sang that once didn't they?
Col
Quoted 380.00 for a 2.8 cam sensor and all it seems to control is the tacho? other than it jumping up and down car runs perfectly
Quote:
Originally Posted by savagedwarf
get yourselves anultragauge or scan gauge then you can read the faults and also clear them and not have to pay mr nissanQuote:
Originally Posted by eric
that is what i have done
I'd be very surprised if that's all it did... Often you'll have a crank sensor and a cam sensor that cross reference each other, if one fails the engine can still run but not in certain modes.Quote:
Originally Posted by patrol2.8
Thats what i thought but when the tacho bounces it throws out the cam position centre code (ecutalk) car runs as normal only other thing ive noticed is it gets a bit more fuel when the tacho bouncesQuote:
Originally Posted by BearGUST