Printable View
hi , just put a clutch in my dx ute4.2/ 170 thou ks and mech said still had 30/40 thou ks left in it..... cost 1600 all up, put in tuff heavy duty clutch... i replaced as had a slight shudder and would slip with the slightest pressure on clutch petal, cheaper to replace now than out the bac some where towing a van , cheers bazz
Just having replaced mine, I went for the CBA unit. Apparently CBA puts together a kit from different sources, so you end up getting good bang for your buck. Machining the flywheel is a must and don't go crazy with the input shaft lube. The little input shaft lube packs are tiny so you shouldn't get more than you need anyway.
Chester - interesting bout going the other way about it. If I ever have to do this job again I might just try it out. Taking the box out was a reeeeeal big job. And getting everything to line up properly took a fair amount of effort that I'd rather not go through again!!!!