Installing an Electric pump to assist the Ip

Mine is about where you’re is @First Pooy & I’ve never had a drama with mine mate

Thanks for the feed back Sprock it is good to hear from someone who has ready mounted it in a similar position and it works fine.

Found these pics of when I installed mine. Been there for 3 or so years without a hitch. I have the earth of the pump connected to the oil pressure switch so the pump will only turn on when theres oil pressure.
Attachment 81247Attachment 81248Attachment 81249

Now sitting behind this sheet of rubber.
Attachment 81250

Are you referring to a safety cut off switch to turn the pump off when there is no oil pressure, I brought a separate one then the standard oil pressure switch which is useless they turn on when the damage is already done.

Quote:

---

Originally Posted by First Pooy

Are you referring to a safety cut off switch to turn the pump off when there is no oil pressure, I brought a separate one then the standard oil pressure switch which is useless they turn on when the damage is already done.

---

No. Just wired the earth of the pump to the factory oil Pressure switch itself. As that’s only an earth wire going to the switch. Works perfectly for me.


Sent from my iPhone using Tapatalk