AC Bearing

Quote:

---

Originally Posted by Roosim

Thanks for all the info, most appreciated. It is the internal compressor bearings - booked in with the mechanic on Friday.

Thanks Westy - will get back to you once we know.

---

$900 for the internal bearing sounds way too dear. I would've imagined you can get a brand new compressor for that price.
Then you still have to get the system flushed, lubricated and regassed at an A/C shop.

You can get them for that price haha, if we are talking about the bearing behind the clutch then its an easy job all you need is a puller and a press make its easier. or a good hammer. Use the puller to pull the clutch off the front, undo the circlip then pull off the pulley, then press bearing out of pulley go to bearing shop and purchase then reverse install :) Should be $50 max

My clutch bearing was $65.
But the actual pump which is being replaced is about $1000.

Genuine is about $1600

I can supply brand new compressors for around $800 mark some cheaper depending what model :)

Sent from my SM-G935F using Tapatalk

Quote:

---

Originally Posted by johno90

You can get them for that price haha, if we are talking about the bearing behind the clutch then its an easy job all you need is a puller and a press make its easier. or a good hammer. Use the puller to pull the clutch off the front, undo the circlip then pull off the pulley, then press bearing out of pulley go to bearing shop and purchase then reverse install :) Should be $50 max

---

It's the internal bearing of the A/C pump, by the sound of it. Bearing behind the clutch shouldn't cost anywhere near $900.
I got the bearing for around $30 from Bearing Wholesalers.

Quote:

---

Originally Posted by dom14

It's the internal bearing of the A/C pump, by the sound of it. Bearing behind the clutch shouldn't cost anywhere near $900.
I got the bearing for around $30 from Bearing Wholesalers.

---

I doubt its the internal bearing as he said it only failed after a muddy and watery trip. Id say he was quoted $900 all up including labor which is nuts but same like to charge haha

Quote:

---

Originally Posted by johno90

I doubt its the internal bearing as he said it only failed after a muddy and watery trip. Id say he was quoted $900 all up including labor which is nuts but same like to charge haha

---

Hmmmmm........$900 to replace the A/C clutch bearing sounds like a highway robbery to me. :)

Quote:

---

Originally Posted by johno90

I doubt its the internal bearing as he said it only failed after a muddy and watery trip. Id say he was quoted $900 all up including labor which is nuts but same like to charge haha

---

That's how my one died.
I don't think the $900 quote is to replace a clutch bearing. Well I hope not.

@Roosim please confirm what your been quoted for.
Sent from my XT1068 using Tapatalk

Quote:

---

Originally Posted by jay see

That's how my one died.
I don't think the $900 quote is to replace a clutch bearing. Well I hope not.

@Roosim please confirm what your been quoted for.
Sent from my XT1068 using Tapatalk

---

Thats how they all die. I replaced the idler bearing twice i think it was.
Kallen needs to fab up a shroud for them.

Sent from my GT-N7105T using Tapatalk

Quote:

---

Originally Posted by jay see

That's how my one died.
I don't think the $900 quote is to replace a clutch bearing. Well I hope not.

@Roosim please confirm what your been quoted for.
Sent from my XT1068 using Tapatalk

---

I hope not as well. Recharge is usually around $200 depending on the place and what else needed to be done.
Replacing clutch bearing wasn't that hard(at least in my RB30).