Looks great... Obviosly lots of silicone where it goes into the airbox will keep the water out.
Printable View
Looks great... Obviosly lots of silicone where it goes into the airbox will keep the water out.
Howdy mate,
I did a quick write up on how I ran my light bar to my roof the other week, no need for drilling holes or running in the snorkel.
IMO buy yourself a wiring harness for $35 and save yourself a world of time/trouble.
A mate and I knocked mine on the roof, ran all the cables over a few brews and probably took 2 hours between the both of us,
Photos/writeup found here:
http://www.nissanpatrol.com.au/forum...ht=supa+centre
If you have any questions, give us a hoy,
Hope this helps,
Cheers,
-Westie
Out through the same bonnet/guard gap. Up behind the snorkel in spit flexi conduit via the rain gutter. Very easy, no drilling, and not that noticeable.
This is how I wired mine. No need to drill a hole in the snorkel too....
Attachment 68304Attachment 68305
Thanks @mudski Does that let any water into the cabin if it rains? I would be worried about water running down the wiring...
Thanks @Toy-Eta I have a supa centre illuminator bar so your instructions will be really handy.
I have only been a forum member for a couple of days but there is so much good info on here. Glad I joined!!!
None mate. The door seal pushes up against it. Plus its under the channel too.... I now have two slots there, the other for the solar panels....Quote:
Originally Posted by UminaTroll
same as mine and no water has ever entered, I haveQuote:
Originally Posted by UminaTroll
used some 6mm figure 8 I think so it sit reasonably flat
same as mine an no water has ever entered, I haveQuote:
Originally Posted by UminaTroll
used some 6mm figure 8 I think so it sit reasonably flat
@mudski don't forget to treat that bare metal eh
All treated john. Just cant see it.