Yeah thats them. Same as the link i posted earlier on ebayQuote:
Originally Posted by threedogs
Printable View
Yeah thats them. Same as the link i posted earlier on ebayQuote:
Originally Posted by threedogs
Yes they are the same ones mine came out of a TJM box, not sure on the part number.Quote:
Originally Posted by lucus30
very easy to fit they just click in place, solder and shrink sleeve all wires.
Thanks boys.
The eBay link were the exact ones I was looking at too.
Sent from my HTC_0PKV1 using Tapatalk
Seems more worth while installing these instead of just changing the lenses on my current ones. Just gotta get hold of a soldering iron and some experience lolQuote:
Originally Posted by threedogs
Sent from my HTC_0PKV1 using Tapatalk
Fully waterproof to boot whats not to like ,plus you'll also need to either fit a designated LED flasher relayQuote:
Originally Posted by bsteveo
or you can solder 50 ohm resistor in line to stop the "fast flash" effect.
Forgot to mention this before its an added cost but not much relays are less than $20
Pop over if you get stuck more than happy to lend a hand, lol
Yeah mate easy to do. Happy to give you a hand if you are local to me?Quote:
Originally Posted by bsteveo
I haven't changed my flasher because I've still got incandescent indicators in the circuit but yes if you go all LED's you will need to replace flasher can or use resistorsQuote:
Originally Posted by threedogs
I have full LED everywhere, love the instant on off effect,
Pic is of some of the globes Ive used
Even headlights ? [emoji14]Quote:
Originally Posted by threedogs
Sent from my HTC_0PKV1 using Tapatalk
No my headlights are 100 watt HID which in hindsight was a
poor choice, great light but way too hot for the plastic reflectors
No sure LED are there yet to replace hi-low beam.
Located in Melbourne's west.Quote:
Originally Posted by lucus30
Sent from my HTC_0PKV1 using Tapatalk