Buying a welder.

Quote:

---

Originally Posted by billyj

check out power 10 gases, avalible through total tools + bunnings if my memorys right, you buy the bottle outright then just swap and go when empty like with bbq gas

---

No total tools up here and Bunnings don't have gas outside of metro areas

Total tools are the go they do most gases while bunnings only do oxygen and acetylene.

Quote:

---

Originally Posted by lucus30

Total tools are the go they do most gases while bunnings only do oxygen and acetylene.

---

They only sell the bottle and dont hire them. They were from memory $349 for the D size and $499 for the E and the refill was $115 I think for the D....
At $140 for the D and $160 for the E for the gas and $15 per month for the bottle hire from BOC, I'm going this way and getting the E size bottle. Which I was told by BOC holds 2.5 times the amount of gas than the D, so for the extra $20 its a no brainer.

IMO its a lot of dollars sitting there if your not welding every day, just seems a waste.
Just buy when you have a project on and maybe see if mates want something made at the
same time you could share costs.

Quote:

---

Originally Posted by threedogs

IMO its a lot of dollars sitting there if your not welding every day, just seems a waste.
Just buy when you have a project on and maybe see if mates want something made at the
same time you could share costs.

---

I think might be going for a cheaper stick welder. I just like having a go at something new.

Quote:

---

Originally Posted by threedogs

Trouble with MIG for the DIYer is the rental and cost of the bottle of Gas,$$$$$$$
I have gasless wire but its not up to par with a MIG weld. For any square tube welding
an inverter would work well, if youre doing a dual cab chop then hire a bottle and mig weld it

---

BOC have a new system for D size bottles, $108 for gas & 1 year rent, cheaper than anything else I have seen.

I have a BOC Smootharc 180, given to me by my boilermaker mate so I don't have to ask him to weld things.
Graham

Quote:

---

Originally Posted by GeeYou8

BOC have a new system for D size bottles, $108 for gas & 1 year rent, cheaper than anything else I have seen.

I have a BOC Smootharc 180, given to me by my boilermaker mate so I don't have to ask him to weld things.
Graham

---

Yep i just got back from boc and went this option. Plus, for the first twelve months you get one refill for free. To top it off the woman who served me is into 4bys, has a playdo, so we chatted for ages about stuff and she is hawt too!

Sent from my SM-P600 using Tapatalk

$108 for rent and gas sounds like a great deal.

@ Covo you'll be surprised what you can weld with a stick welder
it takes skill but imo a better looking weld. Just take your time
get comfortable if you burn holes its too hot or you've welded for to long a
period, Try a series of tacks dont forget to tack the reverse side either
or it wont stay flat. You'll get the hang of it .

Quote:

---

Originally Posted by mudski

Yep i just got back from boc and went this option. Plus, for the first twelve months you get one refill for free. To top it off the woman who served me is into 4bys, has a playdo, so we chatted for ages about stuff and she is hawt too!

Sent from my SM-P600 using Tapatalk

---

Hmm thats not bad value. Might have to go grab one myself.
What gas would you recommend? I was thinking 100% argon?

Argon/CO2 mix for mild steel
In the deal you can get nitrogen, argon, argon/co2 or oxygen.
Graham