Fantastic GUte.
Rossco
Printable View
Fantastic GUte.
Rossco
Which engineer did you use for the seating capacity increase?
For the seating capacity engineering I used
Endracon
6 Brighton Mews
Hillarys
Then took my car along with the paperwork and new compliance plate provided by Endracon to Dept of Transport in Osborne park for the inspection
Nice post mate, I'm looking to change my bucket out for a bench to have the extra seat for a kid.
May got to the same joint I did for the engineering cert.
I'm not sure on what I need parts wise yet. Thinking the bench from a DX, middle seat belt lap sash and gearstick surround. Believe I need to change the hand break as wel but not sure on that yet. Anything else I'm missing?
Hi
Yep, that list what I used. Dx Bench Seat, Dx Gear lever surround (including boot), Dx Handbrake boot & plastic surround to affix to floor, Dx Centre seatbelt (both male & female), Dx bolts for seat & seatbelt.
The torque settings for the seat & seatbelt bolts are in the workshop manual.
There are a couple of good threads on the forum on how others have done it.
Regards
Cheers, started searching wreckers for parts so hoping I'll have all parts n be able to install by mid jan.
Thanks again mate
Good stuff Craig, have only just caught up with your thread. Seems you are making some neat & sensible mods. Will have to now google United Fuel injection’s Fuel Manager.
My missus hates the fact i showed her what you got and i want too...Quote:
Originally Posted by clawrence