Here we go ill try and upload a pic or 2
Printable View
Here we go ill try and upload a pic or 2
For some reason uploading from my phone wont work does anyone know how to get pics up here from my phone
welcome to the forum buddy please enjoy
I installed a pertronix kit today including the flame thrower coil and I have an extended rotor button as well I have never pulled a distributor out to ever get it running right again but this time somehow I fluked it. I put it back in after the kit went in and it was right where I had it before at 12 for gas advance but I can't get it to idle at less than 1200rpm so really timing was set at 1200rpm not the recommended 650 I think it is I turned the idle screw and nothing happened and I turned the air / fuel mixture screw till it started to chugg then turned it back till smooth does anyone know how to get it to idle at less than 1200rpm as the idle screw doesn't want to drop the idle and how far out would idle be if sdt at 1200rpm not 650
Welcome to the forum mate.
I have just been for a drive and I think I turned the fuel way to far down turned it back up and will see how it goes now
Hi and welcome jump in anytime and enjoy
My problem is that my new coil is running hot as hell could smell the heat and gave me a blister to touch it
I put another coil in tonight and got it running again this coil runs heaps cooler now I just need to fix my tacho so I can accurately set the timing
Hey mate I just noticed your thread is under the introductions section.
You might be missing a lot of answers and help from members as a lot don't read the intro section.
You should start a members ride thread or out any questions in their correct category so others can help you if need be mate.