Patrol track

@ Parksey I'll see what I can find out on Monday.
Any factory offsets and track,
still think inside or level with factory flares would be legal.
If you keep your Patrol neat,, chances are they wont look twice[boys in blue]

Quote:

---

Originally Posted by Winnie

Hey drew, I always had 10.5" tyres on my - 22 rims, they sat inside the flares (just) and no rubbing. My new tyres, 12.5" on the same rims sit outside the flares (just) and rub on the flares on flex

---

Champion Winnie! Just the sort if info I was after, thanks.

Sent from my iPhone using Forum Runner

FYI

According to the VSB NCOP11 Section LS Suspension and Steering V2 the wheel track of off-road four wheel drive vehicles must not be increased by more than 50mm. I am pointing this out as 25mm was mentioned repeatedly in this threat.
http://www.rms.nsw.gov.au/registrati...vsi09_rev4.pdf

Quote:

---

Originally Posted by sebfox

FYI

According to the VSB NCOP11 Section LS Suspension and Steering V2 the wheel track of off-road four wheel drive vehicles must not be increased by more than 50mm. I am pointing this out as 25mm was mentioned repeatedly in this threat.
http://www.rms.nsw.gov.au/registrati...vsi09_rev4.pdf

---

Hi mate, in the link you post it states 26mm. Can you post where it says 50mm for the benefit of the thread please.

Cheers MR

Quote:

---

Originally Posted by MudRunnerTD

Hi mate, in the link you post it states 26mm. Can you post where it says 50mm for the benefit of the thread please.

Cheers MR

---

Sorry I used the wrong URL.

The VSB document library can be found at:
http://www.infrastructure.gov.au/roa.../vsb_ncop.aspx

The section about wheeltrack can be found in the PDF file:
http://www.infrastructure.gov.au/roa..._2011%20v3.pdf
Have a look at section 4.2.11

Cheers