Bent up Sill

Quote:

---

Originally Posted by growler2058

You know a bit about dents do ya SteveO :)

---

No expert, but may have done one or two small repairs on a troll before (haha)

Quote:

---

Originally Posted by 04OFF

Please post pics of your damage and then we can get a better idea of what your going to be up for.

---

Attachment 43355
Attachment 43356
Attachment 43357

Quote:

---

Originally Posted by SKID

Attachment 43355
Attachment 43356
Attachment 43357

---

WOW MoFO. Gunna take a sh1t load of rivets that 1!!. MMMMMMmmmmmmm id try spot welding the slide hammer option. If that fails just hide it with the steps. I rekon itd cost a mootsa to get someone to weld a new one in unless ya have a crack at that ya self???

Yea that looks terminal..
I think a cut and replace is needed here

Insurance Claim for sure. it looks like you have had a go at it already? was that so you could open the door?

That's pretty nasty bud, anything can be fixed, but looking at the pics, id be talking to some panel shops at first, even if its just to get a idea on if they/you, have to cut and remove, or you can push/pull and repair.

All this also depends on what the car is worth, and how "fixed" you need it ?

Quote:

---

Originally Posted by MudRunnerTD

Insurance Claim for sure. it looks like you have had a go at it already? was that so you could open the door?

---

Yep door wouldnt open..

Quote:

---

Originally Posted by megatexture

i will be doing this soon also then putting my new sliders on(cheers lhurley) not looking forward to fixing my dents,
I’m undecided if I’ll try it myself but i more than likely will as you don’t really see that part of the car with sliders on so i don’t think it needs to be 100%.

Here is a link to another thread using pop rivets but it just depends how extensive your damage is.

http://www.nissanpatrol.com.au/forum...ll-damage-(GQ)

---

This guys panel look nearlyas bad as mine, why is everyone saying make an insurance glaim? will cosy me 600 for the excess to start with.. rivits etc will cost alot less..

Wash the mud off it before you start unlike that guy... haha

Quote:

---

Originally Posted by SKID

This guys panel look nearlyas bad as mine, why is everyone saying make an insurance glaim? will cosy me 600 for the excess to start with.. rivits etc will cost alot less..

---

From what i can see your whole sill is bent out of shape rather than just the outer skin. If you can straighten it out then go for it. The damage to the top of the sill suggests its far worst than a normal Sill crunch mate. Your call though, a bit of stuffing around and you will sort it out though but having a new section cut and installed would be a winner too as suggested by the Panel Beater earlier in the thread.