Great job did you need to re glue any of the bonnet ribs
Printable View
Great job did you need to re glue any of the bonnet ribs
No mate,all good.
Fark that is very nice...Well DONE!!
Well done, looks like it should have come from the factory like that.
Bit of an update,the egt's were higher and rise faster than with the standard scoop,partly because there is an opening next to the cooler twice the size of the cooler???,so I've fitted some rubber matting under the scoop to hopefully direct all the air through the intercooler.went for a short drive and it's definitely better,still not perfect though
http://i490.photobucket.com/albums/r...pscbe2be5a.jpg
See if you can come up with some kind of aero Vane that will drag say 50% of the air going in to the front of the IC.
It will all want to go to the rear anyway, That's how my larger scoop works, meaning its suppose to work at a lower speed
say 60kph instead of 80kph like OE
Will do mate,might be a while though,the minister for after hours affairs(aka the hand brake)reckons we need a new kitchen first!Quote:
Originally Posted by GUtsy ute
Found this Tassie... but dont think it would fit yours???
http://cgi.ebay.com.au/ws/eBayISAPI....m=271307287992
Where did u get the scoop from mate? Keen to get the same one.
It's telling me the listing is no longer available,what was it old mate ?Quote:
Originally Posted by rochjas
And statok I just rang around the local wrecking yards and found one that had one I think I payed about $220?