Self tapping screwsqQuote:
Originally Posted by Bubba
Sent from my GT-I9505 using Motorculture mobile app
Printable View
Self tapping screwsqQuote:
Originally Posted by Bubba
Sent from my GT-I9505 using Motorculture mobile app
Here's my thread about them mate.Quote:
Originally Posted by Bubba
http://www.nissanpatrol.com.au/forum...unnings+flares
You just need some kind of tab to attach and use the existing factory screws and holes in the arches.
I have seen a lot of people just tech screw them into the body......No good!!!
cool thanks for the link , i do not have the original bolts or tabs so I will have to find some to do it , makes good sense to do it that way
You will still have the original holes in the arch so I would just contact Patrolapart or wreckers and rip off those little clips and screws. You wouldn't even need the Nissan screws to be honest. Just those little clips that pull down when the screw tightens would work.Quote:
Originally Posted by Bubba
Even small bolts and washers would work. I just don't like screwing new holes in the arch exposing raw steel for rust. Especially under the fold of the arch where wet mud sits there 24/7.
Plenty of people do it though, each to their own but try and utilize all factory things were possible.
thanks for the replies cheers
Sorry mate your thread got hijacked a bit which is not like us...lolQuote:
Originally Posted by menace 2
Atleast we stayed on topic I guess.
lololol...alls good...there was a solution in there for me at least....lolol
I used large flange rivets with washers on the other side
:bigthumbup:Vinyl skirting from Clark rubber also works well, used it for a vacuum skirt under the Esprit.
I'm one of those rough buggers. Used old conveyor belt and tek screwed them on. Hate pop rivets especially in vibration scenarios Attachment 45840