Maybe your vehicle has the earlier plug.
I would take your old radio with you and go back to super cheap and see what they can match.
Is your vehicle a TI?
Printable View
Maybe your vehicle has the earlier plug.
I would take your old radio with you and go back to super cheap and see what they can match.
Is your vehicle a TI?
The correct aerpro harness should only have 2 receiving connectors, 1 for the large plug and the 2nd connector will take the other 2, 1 above the other / side by side depending on which way you look at it. You will generally need an aerial adapter as well to change from the nissan 2 pin to generic and will end up with a spare lead left over
Tap, Tap, Taparoo
Hello Red...have just done this when picking up my GQ in Melbourne ...stopped in Gold coast at home and did it on the way through...took only about 1 hr....it can be done....I have a Ti and found some issues because of the amplifier under the drivers seat...I purchased the plug and play harnesses from auto barn...you will also get in the kit a different ariel connection harness and one end of it will just not be used...if you have an amplifier you will have to break into a live wire and connect a wire you will have left with no connection...if you dont do this you will have no sound...I did actually have pics of this but at this stage I still cant seem to get photos up on here for you even though Clunk gave me all the info to do it....bottom line is that there is proper adaptor harnesses to do before you prostitute your wiring mate....if you do end up having no sound then i will take my facia off and have a look for you to give you a colour code of the wiring you need to splice into...cheers menace