my gu rear storage draws

going to be different and go with checker plate lino after sealing the wood. that way any spills will be a easy clean up. will weigh it and post photos on sunday.

Looks good mate, I'm sure your proud of your work. Storage is always a big talking point on the forum.

still coming along waiting on some aluminium checker plate for the rear doors

Quote:

---

Originally Posted by Westy's Accessories

Not to sound negative because they look great, but particle board..
If I was you I'd be saving up asap, building one using 12mm ply as particle board will just fall to pieces once off road.

But top design. I like how you have left the fridge low but gone higher with the draws.. nice job.

Kallen Westbrook
Owner of
Westy's Accessories

---

I'm not sure if it still happens, but years ago motor bike shops used to chuck their crates that were made from ply wood. I wonder if that is still a viable source today?

Good job mate, well done!

Quote:

---

Originally Posted by NP99

I'm not sure if it still happens, but years ago motor bike shops used to chuck their crates that were made from ply wood. I wonder if that is still a viable source today?

---

A 2.4x1.2 sheet of 12mm is only $30~, I'd go new and have it all shiny.
Just pre-drill and counter sink the holes.. sweet as..

Kallen Westbrook
Owner of
Westy's Accessories

Good idea, today it's probably Chinese ply :)

I know ours is local, the local mill makes it.. :p
But still its cheap quality.. trying to compete they push it to quick, had to wet mine down and re set it to remove a 60mm bow in 2 of the 3 sheets...


Kallen Westbrook
Owner of
Westy's Accessories

A lot of fastners are made in China. I bought gal nails to fix up weatherboards and they rusted within weeks, leaving rust trails on the new paint :-(

Looks great...... Well done
Iam off to the shead LOL