Either was you rotate the unit it needs 40mm off set. Not happy about an offset that big for line pull without major fabrication work.
No dramas, Ill fit to my car trailer and source another one for the Patrol.
Printable View
Either was you rotate the unit it needs 40mm off set. Not happy about an offset that big for line pull without major fabrication work.
No dramas, Ill fit to my car trailer and source another one for the Patrol.
Just scored an XTM winch today from $899 to $371, will give feedback once run in.... However Pat Callingham use them all the way around australia (cant be too bad)!
Good score WilliamPatrol Used properly should be brilliant. Will look for pics and feed back.
Yeah, got it done with a team member discount.
I will post some pics and feedback after use, I'm just having a problem finding a thick enough winch mounting plate to suit.
It suggested 10mm thick, although its only 12000lbs winch, and all mounting plates bolt onto the chassis so I dont think I need it that thick. I'm thinking somewhere around the 5mm mark, I rang Tigerz11 and they only have a winch mounting plate for there 12000lbs winch as a 4mm thickness.
I'm looking at one on Sunday, so should have the XTM winch tested through next week.
:Yahoo!: