Welcome to the form
crankshaft oil seal.... ahh... last time mine was done it needed to be heated with an oxy to get it off....
have fun buddy
Printable View
Welcome to the form
crankshaft oil seal.... ahh... last time mine was done it needed to be heated with an oxy to get it off....
have fun buddy
Just don't need to place all your questions under Introduction Thred Luke. You'll get there.
Tim
G'Day and welcome to the forum mate
G'day & welcome aboard Mate
Great lot here with tons of advice, adventures and experiences to share
Hang around and Jump in where ever you feel comfortable.
Enjoy, Cheers Pete
G'day mate welcome aboard great bunch with some good info and advice here so feel free to jump in and contribute were you can
I just had my Crank seal Replaced. The Pully Gear was seized. Used about 2 cans of WD40 to get it off and big hammer....... well broke the plate behind...of course that wasnt a good idea. should have read the POST to heat it up. My mechanic had no idea...... Cost me another $160 to replace the crank gear.
after all that put it all back together total $660 2 hours of driving it was pissing down with OIL again. Back to the workshop to strip it down again.
it turns out the bashing left a grove and some bur around the seal which tore the Seal on the way back in...... Look at the bright side at least the pully wasnt seized that time around.....
Write this down 1000 times "I must find a new mechanic" lol.
Cheers, the ferret.
ahh yes i remmeber writing lines back in school......
I must find new mechanic
I must find new mechanicI must find new mechanicI must find new mechanicI must find new mechanicI must find new mechanicI must find new mechanicI must find new mechanicI must find new mechanicI must find new mechanicI must find new mechanicI must find new mechanic
Nope, not good enough, spacing is wrong and needs to be on consecutive lines, start again.Quote:
Originally Posted by Xntric
Cheers, the ferret.
G'day Mate - Welcome aboard join in when you are ready and have fun mate plenty to do see and if u have any problems just ask and im sure u will get an answer !! Bucket loads of usefull information here plenty to read so join in meet the great bunch of guys and girls on our wonderful forum !!
You will not be disapointed !!
ENJOY and WELCOME
Tim