Threedogs motor thread

Quote:

---

Originally Posted by the evil twin

If you want to fill, drill and retap then Devcon is the go... we used it in the RAAF and that shit is awesome.
Can be drilled, tapped or machined
Even rebuilt a busted water pump housing with it on my Ski Boat years ago
but....
it isn't cheap and would be only if you cannot get a housing thingy

http://www.devcon.com/prodfiles/pdfs/fam_tds_107.pdf

---

I've used this stuff when I was an apprentice. As hard a steel and yes we did machine it on a lathe.

Quote:

---

Originally Posted by threedogs

Bumped for any takers please...........

---

I can do it around 1pm, will need both of you to PM me your addresses though.

Quote:

---

Originally Posted by Irish

I can do it around 1pm, will need both of you to PM me your addresses though.

---

PM sent and thanks for this
Its OK Mark is dropping it off
this morning

Quote:

---

Originally Posted by the evil twin

If you want to fill, drill and retap then Devcon is the go... we used it in the RAAF and that shit is awesome.
Can be drilled, tapped or machined
Even rebuilt a busted water pump housing with it on my Ski Boat years ago
but....
it isn't cheap and would be only if you cannot get a housing thingy

http://www.devcon.com/prodfiles/pdfs/fam_tds_107.pdf

---

I have some 2 part stuff they use at QANTAS so must be a similar product

will have a replacement housing this arvo so this wont be required

It's turning out to be a group effort. What a head fark for a fairly simple job.
Good onya Mark and Irish.
Sorry I can't get out there this weekend John

Atleast you know you have pressure in the system..
The boys will get it sorted bloke..

Another big thanks to Mark, what with trying to sell his house and all.
Anyway new thermostat housing fitted, I tested the stat and it worked fine.
Now only the alternator , shroud and fluids to finish oh and the viscous fan, lol

You can thank me later......lol

Quote:

---

Originally Posted by jay see

It's turning out to be a group effort. What a head fark for a fairly simple job.
Good onya Mark and Irish.
Sorry I can't get out there this weekend John

---

Don't thank me mate, all Mark today, he wore John out before I had a chance to rock up.

Quote:

---

Originally Posted by Bloodyaussie

You can thank me later......lol

---

Caravan puller,,,,,,lol