What did you buy today

Went to buy a drivers side guard of a guy in Mornington for $50 ended up with 2 for $70 both have been on a car but have never had a real coat of paint and are still in the panel black as new. Perfect condition.

20L of penrite oil for $119 from repco ready for the next service!

http://www.nissanpatrol.com.au/forum...015/10/328.jpg


Sent from my iPhone using Tapatalk

Nice Bacho. Curious how come you went for 50 viscosity. Summertime?

Also how did you go with your rear main seal.

Quote:

---

Originally Posted by Hodge

Nice Bacho. Curious how come you went for 50 viscosity. Summertime?

Also how did you go with your rear main seal.

---

Yeh combination of things...I have normally used the 15w-40 but I couldn't get that on special in the 20L drum at the time. Plus penrite specifies that the 15w-50 can also be used when 15w-40 is specified, so we'll see how it goes!

I'm dropping it off with ATOC to get fixed over the new couple days, so fingers crossed!


Sent from my iPhone using Tapatalk

Another project for the time off.. pick it up tonight
http://www.nissanpatrol.com.au/forum...015/10/331.jpg

Quote:

---

Originally Posted by Hodge

Nice Bacho. Curious how come you went for 50 viscosity. Summertime?

Also how did you go with your rear main seal.

---

I run a 5/40 with no problems

Quote:

---

Originally Posted by biggqwesty

Another project for the time off.. pick it up tonight
http://www.nissanpatrol.com.au/forum...015/10/331.jpg

---

i have one almost identical, i notice the butterfly damper on the top of the fire where the flue goes is missing but you can make that up, just a circle of metal with a handle to damp it down and slow the burn. they are a very good heater btw

Quote:

---

Originally Posted by Stropp

i have one almost identical, i notice the butterfly damper on the top of the fire where the flue goes is missing but you can make that up, just a circle of metal with a handle to damp it down and slow the burn. they are a very good heater btw

---

Yea friend of mine has one inside and it's good..
Was looking for more an oven but guess I can still make that 😆

Quote:

---

Originally Posted by Hodge

Nice Bacho. Curious how come you went for 50 viscosity. Summertime?

Also how did you go with your rear main seal.

---

Penrite has a new line called "extra 10", you can see it on the label there. Basically with "new technology " all their ratings go up by ten. But as said above, it is still compliant to 40 specs.

tappin from tassie

Quote:

---

Originally Posted by biggqwesty

Yea friend of mine has one inside and it's good..
Was looking for more an oven but guess I can still make that 😆

---

I had mine in manland and it just rusted away, now running a mates Coonara style heater