Mudski GU Build Thread

Quote:

---

Originally Posted by Bacho86

Want to double up and make me one as well?? [emoji1] lol


Sent from my iPhone using Tapatalk

---

Get in line mate lol.

Quote:

---

Originally Posted by Hodge

Get in line mate lol.

---

Hahaha well maybe mark can triple up on materials and we can make an arvo of it...! Lol


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by mudski

Bolted down mate. They supplied 20mm long screws. Gonna grab stuff all they were. So I drilled right through and bolted it down.

---

Yeah wow that's pretty dodgy, especially for the $$ you spend on them. Yeah definatly want it bolted down.

She's looking nice now Markie, especially that mod plate. . ☺

......................................

Quote:

---

Originally Posted by mudski

Yeah a bit disappointed on those screws. But they do supply packets of different nuts, bolt, and brackets all to suit the different fridges that it can take. Really well made the slide is, I can see why it cost so much. So the screws was nothing too bad I suppose. Even if they were longer to actually grab into the wood I wouldn't have used them. Bolting it down is the way to go.

As for the barn door table. I don't have any room, between the drawers and the door. maybe 5mm to the rhs of the door, as it slightly curves inward toward the tail light. Just not sure on how to go about this one. Those caravan ones are too bad, just to thick, and too small i think. If I use some timber to make one up it will be too thick aswell. Love to do stainless, I might draw something up and get a quote from the cutters.

---

http://www.nissanpatrol.com.au/forum...2016/09/97.jpg

12mm ply with a couple of strips under it which located between the draw sides and bench top laminex glued on top..
Sorted..
Make it the whole draw length if you want the space.. I made mine to suit a peice of laminex I had left over from the gq draws.
Best bit is you just slide it out the way or lift it out if you need big stuff out..
Make it a tap in fit and it doesn't budge..

A few more pics of it in my build mate towards the end..
https://r.tapatalk.com/shareLink?url...are_pid=679853
Westy's GU

Quote:

---

Originally Posted by bigguwesty

http://www.nissanpatrol.com.au/forum...2016/09/97.jpg

12mm ply with a couple of strips under it which located between the draw sides and bench top laminex glued on top..
Sorted..
Make it the whole draw length if you want the space.. I made mine to suit a peice of laminex I had left over from the gq draws.
Best bit is you just slide it out the way or lift it out if you need big stuff out..
Make it a tap in fit and it doesn't budge..

---

Hey thats an idea.... I will see if theres room for this on top of the drawer and under the shelf section. As the drawer on the right usually has all the non cooking items in it so I can have this open and still access the left drawer. :thumbup:

Fix your avatar too dude. Your car will roll over. Lol.

Quote:

---

Originally Posted by mudski

Hey thats an idea.... I will see if theres room for this on top of the drawer and under the shelf section. As the drawer on the right usually has all the non cooking items in it so I can have this open and still access the left drawer. [emoji106]

Fix your avatar too dude. Your car will roll over. Lol.

---

It's the scape of the pic..
It's the right way in my phone lol..

My outback draws have nearly 25mm between draw top and top shelf so heaps of room..

Quote:

---

Originally Posted by mudski

Fix your avatar too dude. Your car will roll over. Lol.

---

There ya go. Resized it..

Quote:

---

Originally Posted by mudski

Hey thats an idea.... I will see if theres room for this on top of the drawer and under the shelf section. As the drawer on the right usually has all the non cooking items in it so I can have this open and still access the left drawer. [emoji106]

Fix your avatar too dude. Your car will roll over. Lol.

---

Yeah like that idea, seen it before and works quite well. . What about checker plate ally as another option. . .