Printable View
Produced and installed a floating shelf in the office yesterday. Oiled and caulked in now. Left some daggy bits on the end for character, also has some decent veins in the centre. It's fiddleback messmate. Happy with how it came up.
Attachment 86222
Attachment 86221
Sent from my SM-G988B using Tapatalk
Gave the cars a clean and decided to have a crack at a "hack" I saw on Facebook. Works a bluddy treat! Who would have thought so much dirt could be so unobtainable to the vaccum. Video taken after it was vaccumed.
https://youtu.be/HjndjzlU1Ls
Sent from my SM-G988B using Tapatalk
Just be careful mate as that will destroy the carpet pretty quickly.
Sent from my SM-G986B using Tapatalk
Reckon mate? I did it with no sanding pad, was just the vibration of the machine. Do you think it will still damage the Matt?Quote:
Originally Posted by Winnie
Sent from my SM-G988B using Tapatalk
Yes 100% it will. I use vacuum and air compressor on mine.
Sent from my SM-G986B using Tapatalk
Cleaned the shed out again...cold beer in the fridge.
Sent from my SM-G960F using Tapatalk
Thanks I'll give the compressor a crack next time. Legend!Quote:
Originally Posted by Winnie
Sent from my SM-G988B using Tapatalk
My noo garage lights! I can now see in here!
http://www.nissanpatrol.com.au/forum...2022/11/38.jpg
Sent from my iPhone using Tapatalk
Cool garage BTW.
It looks like if you fit a roof rack you can still roll into it.
Thank you. I can't fit in there with my roof rack on unfortunately.Quote:
Originally Posted by BrazilianY60
I bought a creeper for the first time in my life, seen on the floor in the above pic. Why did I NOT buy one of these years ago?! Instead I have been sliding on cold concrete with nothing but a piece of cardboard in between. Lol.