Well at last she is home, first time of the farm on 20 years!! lol altho on a trailer, so first thing on the list to do was som contemplating wich required some heavy dutie contemplation fluid :Yahoo!::1062:
Printable View
Well at last she is home, first time of the farm on 20 years!! lol altho on a trailer, so first thing on the list to do was som contemplating wich required some heavy dutie contemplation fluid :Yahoo!::1062:
Well today I have started removing seats and floor coverings cleaning out half a paddock of dirt and looking for rust found a few small spots and a larger one (will post piccies later) and found a few stubourm bolts that just wont come out but we will work around that for now
Yeah soaked em over night some look like they have been cross threded or something cos they are stuffed but will run a tap die thingy thru the nut and get new bolts I think.
Got some piccis will start with the flap wheel when it cools down
wont be long now mate be able to cut back and spray paint
Hmmm looks like the replacement seat belts I got are not the same as the ones already fitted :eek: might have to look into that more when Im puttin her back together that would be my booboo :frown:
got some grinding done this morning before it gets too hot, slow but getting the jobs done,
Howd ya go with the bolts Michelle? Another way if you got oxy aceteylene if not a good butane torch from bunnings etc. Heat the bolt up and then either quench with cold water or you can get a freeze spray from auto shops, some times this will crack em just enough
Got the ones I needed to get out, the two in the front seats I ended up pulling the seats apart and left the ones there one side spins but doesnt go any were and the other side one some one has had a go at it before with a cole chisle and hammer by the looks and totally buggerd the top lol but its all good im working around it for now :)
Got some covers from super crap for $5 so made em fit my dickie seat, and now I am going inside cos its bloody hot in that sun lol :p