Hi
Reassembly of optical media headlights (among others).
http://imageshack.us/a/img21/5203/gyol.jpg
Best regards
Petit caillou.
Printable View
Hi
Reassembly of optical media headlights (among others).
http://imageshack.us/a/img21/5203/gyol.jpg
Best regards
Petit caillou.
well done mate, the bride is certainly looking good :)
Petit Caillou. I am so glad I found your thread. Have read the whole thing - your whole epic has been an amazing achievement. I feel inspired and will be planning mine for the future. Remarkable what one can do with a willing attitude and persistence. Hugely admire your story and really look forward to seeing the result. Well done and good luck in the end stretch!
As with all the other comments it's really nice to check in on this thread from time to time and see the progress. There is a lot of work but what a great finished product you will have. Thanks for sharing with us along the way.
I continue with a few photos:
Installation of optical crystal :
http://imageshack.us/a/img9/560/ewba.jpg
http://imageshack.us/a/img801/5683/8i30.jpg
Painting the inside of the cover , with an old paint that was lying in the workshop , I have long wanted to try this painting , shaking the pot I noticed she had not dried , but some doubts given its age and storage (freezing winter, sometimes - 15 ° see less and sometimes the hot 45 ° see more in the workshop). As was thinner and hardener that I still had a bit of a different brand , I mixed the two in a rough mix and sent it all with the firecracker 0.8 nozzle without conviction on the final goal. I confess to being surprised by the record that I find really not bad. To clean the paint , hard drive , gasoline makes no difference , still less the Hamérite thinner , white spirit does not much there , you really insist on cleaning with white spirit .
Photo from under bonnet installation of sound-absorbing coating :
http://imageshack.us/a/img547/102/zzn8.jpg
The old magic pot:
http://imageshack.us/a/img812/152/pf9t.jpg
Other tests concluding the hammered in Hammerite paint , available in a small pot full of color , paint brush spreads only rendering is really nice, it resume the effect of the old peintent sheets at a time , it gives a solid feel , it is also corrosion .
http://imageshack.us/a/img208/1298/glq9.jpg
So much for the moment, with other bits in preparation for the next photo reports .
Best regards
Petit caillou.
nice one :) wishing i had a shed and more equipment.
almost there Petit looking really good mate
Looking good mate.
Hello,
As I walked into the dealership of the manufacturer, the supply of the carpet cost far beyond the understanding (around 1500 euros for all insulation carpet cover + front + rear passenger carpet , trunk carpet , carpets passages wheel, sound insulation for all ) .
Looking good I finally found , unfortunately the French suppliers in thermo- formed carpet does not run the streets , therefore I pulled on Australia or not less than four manufacturers offer product costs around 750 euros postage , taxes and customs included , to receive this product. The advantage is that you can choose the finish : curly plush or super plush, and the immensity of colors , it is charcoal gray ( Charcoal ) . blabla end up with photos.
The insulating cover sticker set up :
[img] http://imageshack.us/a/img703/4233/6w7n.jpg [/img]
The cover of Australian ( course) set up :
[img] http://imageshack.us/a/img845/4590/x9n5.jpg [/img]
Carpets :
[img] http://imageshack.us/a/img545/1916/oxyz.jpg [/img]
Some detail photos on the finish:
[img] http://imageshack.us/a/img13/8503/qw5h.jpg [/img]
Thermo Forming seat fixations :
[img] http://imageshack.us/a/img405/2016/yguz.jpg [/img]
Texture:
[img] http://imageshack.us/a/img62/8052/jkam.jpg [/img]
The underside and sewn edge :
[img] http://imageshack.us/a/img197/1750/ngs3.jpg [/img]
2 rolls phonic insulation :
[img] http://imageshack.us/a/img202/9696/yfcg.jpg [/img]
That will remain the introduction to , identification of cuts to make given that the pieces are larger than the original so as not to be too tight and also cut holes and passages shifters , brake handle , of the seats , fixing belts, ...
This weekend , in addition to finishing the cover ( above) the brake servo in place, clamps brake and clutch hoses dismantling of Horns to clean and repaint .
Sincerely,
Hello,
As I walked into the dealership of the manufacturer, the supply of the carpet cost far beyond the understanding (around 1500 euros for all insulation carpet cover + front + rear passenger carpet , trunk carpet , carpets passages wheel, sound insulation for all ) .
Looking good I finally found , unfortunately the French suppliers in thermo- formed carpet does not run the streets , therefore I pulled on Australia or not less than four manufacturers offer product costs around 750 euros postage , taxes and customs included , to receive this product. The advantage is that you can choose the finish : curly plush or super plush, and the immensity of colors , it is charcoal gray ( Charcoal ) . blabla end up with photos.
The insulating cover sticker set up :
http://imageshack.us/a/img703/4233/6w7n.jpg
The cover of Australian ( course) set up :
http://imageshack.us/a/img845/4590/x9n5.jpg
Carpets :
http://imageshack.us/a/img545/1916/oxyz.jpg
Some detail photos on the finish:
http://imageshack.us/a/img13/8503/qw5h.jpg
Thermo Forming seat fixations :
http://imageshack.us/a/img405/2016/yguz.jpg
Texture:
http://imageshack.us/a/img62/8052/jkam.jpg
The underside and sewn edge :
http://imageshack.us/a/img197/1750/ngs3.jpg
2 rolls phonic insulation :
http://imageshack.us/a/img202/9696/yfcg.jpg
That will remain the introduction to , identification of cuts to make given that the pieces are larger than the original so as not to be too tight and also cut holes and passages shifters , brake handle , of the seats , fixing belts, ...
This weekend , in addition to finishing the cover ( above) the brake servo in place, clamps brake and clutch hoses dismantling of Horns to clean and repaint .
Best regards,
Pierre.