Ooh very nice, are they new or second hand? . . . Some very nice country out there too. .
Sent from my SM-G930F using Tapatalk
Printable View
Ooh very nice, are they new or second hand? . . . Some very nice country out there too. .
Sent from my SM-G930F using Tapatalk
http://www.nissanpatrol.com.au/forum...2019/09/75.jpg
Went up to the local for a quick overnighter last night, was good even if it starting raining as soon as I got in my swag lol
http://www.nissanpatrol.com.au/forum...2019/09/76.jpg
The last two bits for my highmount turned up, now has air freespool so whacked it all together
http://www.nissanpatrol.com.au/forum...2019/09/77.jpg
Then cut the grill to suit and modified the bullbar to suit the +76 drum
http://www.nissanpatrol.com.au/forum...2019/09/78.jpg
Fitted it up to the car to see whether I’d cut enough
http://www.nissanpatrol.com.au/forum...2019/09/79.jpg
Then fitted the rope off my lowmount and a cheap fairlead I bought to test it out, just need to tidy up all the wiring and do some minor welding on the bullbar, this bar is definitely not designed to take a larger winch!
Bloody Awesome Dave!!
Please be sure to install that air spool line clip on the HM plate side as close as possible, especially when new they rotate very hard well sealed once found:-(
Sent from my iPhone using Tapatalk
Back up top to the good old shed queen now Dave mate! Hope this picture makes sense?
http://www.nissanpatrol.com.au/forum...2019/09/81.jpg
Typical bloke style me when installed the oldish UK-Delta +76 too, she’ll be a rats twisted nest soon MB enough:-)
Sent from my iPhone using Tapatalk
Thanks for that mate, I’ll have a look when I run the air line, I’ve only just fitted the line as I couldn’t access the end of the drum in the bar
You’re onto a winner mate, you’re gonna love it [emoji106]
Don’t forget as before to get your fittest littlens, or their 50cc quadies to run half a dozen test spools in/out before departure.
Frees the new spool up perfectly so it’ll work like it’s meant to under easy climbing chicken legs of mine kneecap duress:-) [emoji106][emoji106]
Sent from my iPhone using Tapatalk
http://www.nissanpatrol.com.au/forum...019/09/108.jpg
http://www.nissanpatrol.com.au/forum...019/09/109.jpg
http://www.nissanpatrol.com.au/forum...019/09/110.jpg
Added some push buttons on the grill so I can use the winch while outside the car as I have incab switches. Then repurposed some U bolts to use as winch horns.
The bars coming back off tomorrow to get welded up then I can do all the final wiring and fitting and spool some rope on under tension!
http://www.nissanpatrol.com.au/forum...019/09/129.jpg
Welded in the winch horns, removed my light bar and I’ll get a smaller one to mount under the hoop, fitted the winch up and wired it in completely, plumbed up my air free spool.
http://www.nissanpatrol.com.au/forum...019/09/130.jpg
And here’s a view from the drivers seat!
Absolutely gotta love GQ flat center dash space, shit hot tops Dave mate [emoji106][emoji106]
If time permits, die grind a wider/higher fairlead space to allow a ‘Big-Mouth’ type fairlead to forgive a figure 8 emergency knot to pass through they say :-) [emoji106][emoji106]
Sent from my iPhone using Tapatalk