What did you do to your Patrol today!

Finally put + & - bus bars behind the back seats, in front of my drawer system.
It will allow direct 12v from the aux battery for anther 5 items or so in the back, including the water pump I got for free!!
Also fitted a screw in power socket so the Engel power cord now screws in. As apposed to using the 'cigarette' lighter plug and have it rattle loose...again.

SO...I finally got my 40L Engel fridge connected to the aux battery, so I can take the keys out and lock the car, instead of having the accessories on.
Only took my 1 1/2 years.

33x12.5 bighorns on 15x8s and a 3" efs lift wooo

Tappin trolls
Brendan

Photos!!!!!!!!!

I put my muddies on today, ready for some action this weekend!

Glued in my housings for my bullbar indicators tonight, also spliced into the loom to give me power for em, now tomorrow all I need to do is screw the lights in and wire them up!

Drove around Pemberton and took the family to Big Brook Dam


Sent from my GT-I9305 using Tapatalk 2

Strengthened my rear lower control arms with angle iron. Saved my self $300.

http://imageshack.us/a/img819/1619/5...3554859988.jpg

took my front bar off and driving lights and aerial take it to the panel shop tommorrow then when its done its off to town & country for the new bar and winch install

Testing the positioning, need to do some more permanent wiring as well.


Attachment 26692




Sent from my iPhone using Tapatalk

Helped a mate adjust the valve clearances. It was getting a bit noisy but now it's purring like a kitten and a little more mid range power.
Very happy with the results and I learnt how to do something new:-)

FanTapstic!

Wow.... Must be the week for it .... Had my valve clearances done this week plus injectors and new viscous fan, getting it tuned on the dyno this week....
Haven't seen the car yet as I am at work but they reckon it is a different car, I didn't even notice the injectors needed doing, they noticed it on the dyno two weeks ago when they did the uni chip!