Jeeesus Markie certainly don't do things in halfs, love your work. U panning on doing sum slabbing??
Sent from my SM-G930F using Tapatalk
Printable View
Jeeesus Markie certainly don't do things in halfs, love your work. U panning on doing sum slabbing??
Sent from my SM-G930F using Tapatalk
Brand spanker 2, nice[emoji16]
Sent from my SM-G930F using Tapatalk
WOW WOW WOW, big boys toys!!
Jesus Markie she's a monster!
Sent from my SM-G960F using Tapatalk
Holy shit, remind me to never piss you off MB.
She’s going into a counter levering docking station for some chunky Ironbark logs, stuffed if any of us could hang onto this puppy all day :-)
Sent from my iPhone using Tapatalk
Yeah nice one, so that's what the conveyor setup is all about on the mega trailer, it's all making sense now lol. .
Sent from my SM-G930F using Tapatalk
May I also recommend anyone planning on following @MudRunnerTD down a casual chosen 4WD Scrub track of his choice to purchase two of these hedge trimmers! Both bolted forward 45degrees to each front corner of your bullbars should suffice :-)
Sent from my iPhone using Tapatalk
Bloody oath, cheap & effective way just zip tie the throttles fully open and Bobs your uncle [emoji23]
Sent from my SM-G930F using Tapatalk
Picked up a free td42t, what a SCORE!!!
Low kms!!!
http://www.nissanpatrol.com.au/forum...018/10/562.jpg
Sent from my iPhone using Tapatalk
What a score
You mean TD42 surely @AB ;-)
Get that fresh clingwrap roll ready :-)
Sent from my iPhone using Tapatalk
Yeah It's not the cleanest td42 I've seen that's for sure, strange hole in the block too?
http://www.nissanpatrol.com.au/forum...018/10/563.jpg
Sent from my iPhone using Tapatalk
Yeah that's a boat anchor for sure
https://youtu.be/T8ASgGwxJyc
Sent from my SM-G930F using Tapatalk
Picked up a new Jaycar 140A Dual Battery Isolator Kit with Wiring.
Discontinued stock reduced from $159 down to $99. Got the second last one ;) Attachment 76739
MS171 more suitably realistic ;-) !
http://www.nissanpatrol.com.au/forum...018/10/565.jpg
Sent from my iPhone using Tapatalk
Top saw just hope the ignition module on yours lasts longer than mine
I'll just leave this here lol
http://www.nissanpatrol.com.au/forum...018/10/567.jpg
Sent from my iPhone using Tapatalk
It's got a pointy bar on it, good for carving, need to make sum sculptures. How big is the bar on 88 and how many drive links? . . . Gonna take a few beers to sharpen that baby lol . .
Sent from my SM-G930F using Tapatalk
Yeah little 12” carving bar for the finer work mate. The biggin is 60” I think but haven’t counted links yet, won’t be me sharpening thankfully;-)
Sent from my iPhone using Tapatalk
Treated my self with some new sound quality ...
And also a great deal on a 2.5hp compressor currently from SuperCrap , which was already put to use on front radius nuts. http://www.nissanpatrol.com.au/forum...018/10/568.jpghttp://www.nissanpatrol.com.au/forum...018/10/569.jpghttp://www.nissanpatrol.com.au/forum...018/10/570.jpg
Sent from my SM-N920I using Tapatalk
@Hodge are you fitting an amp as well.
Thinking of running the radio unit off the Aux battery
not sure yet
glad I found this out now, however I have 240v 800nm torque gun, so reckon it will be up to the task! Saves stuffing around with the wrong tool to begin with - thanks
The airgun definitely undone the bolts on the axle end. 4 all up. 24mm sockets.
The nut at the back however, I still had to do some odd body manouvres and angles to get it undone.
Simply cannot get the gun or a spanner in there.
I cracked them using a 1/2" ratched with a deep 24mm socket and a hydraulic jack extension handle for leverage.
I don't know what the access to this nut is like on the GQ.
http://www.nissanpatrol.com.au/forum...id=76741&stc=1
... had to do the same as that ^^^^ on mine.
A shallow socket is too short, any extension is too long... and... as per the old story... a deep socket and 3/4 drive is juuuuuust right
Thanks guys for the heads up. I am yet to start planning this as waiting for the draglink to arrive, then doing draglink, tierod and spacers at the same time. 2 bathroom reno's just about done, new floors go down over the next 3 days and then its patrol time!!
Well not today technically but over the past couple of weeks... cross country Intercooler kit and a UFI 18g turbo have just turned up...
Now for the installation mission (and the bigger mission of finding the time)
Bought a gold spiral wheel and it arrived today.
Just trying to work out the settings and took some silt samples from the side of a dirt road culvert and found my first piece of gold...YAY!!!
Time to head up to the high country and have some fun!
Bought my first fishing rods in 30 years.
Time to find some water and myself.