Winnies 747 TD42 GQ

Flywheel either rattle gun or breaker bar. Just need to wedge a screwdriver or prybar into one of the flywheel teeth and lock it against a dowel i think from memory. Kindof a fun job when you've only got two hands lol. . .

Sent from my SM-G930F using Tapatalk

Lol yep I forgot about that yeah that spot is correct for feed, sorry bro!


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by Rossco

Flywheel either rattle gun or breaker bar. Just need to wedge a screwdriver or prybar into one of the flywheel teeth and lock it against a dowel i think from memory. Kindof a fun job when you've only got two hands lol. . .

Sent from my SM-G930F using Tapatalk

---

Yeah problem there is because the engine is just sitting on a tyre it wants to turn onto its side. Would probably help if I could get somebody to hold onto it.

Sent from my SM-G960F using Tapatalk

Quote:

---

Originally Posted by Winnie

Cheers Nicco! Hey with the sticker you print can you only do vinyl or can you use other materials?

Sent from my SM-G960F using Tapatalk

---

not sure, what do you want to cut and ill let you know if i can cut it lol

Quote:

---

Originally Posted by Winnie

I think the only option is going to be an effing big rattle gun. Mine won't budge them and with a big breaker bar it just want to rotate the engine onto its side because it is not secured.

Sent from my SM-G960F using Tapatalk

---

i have a rattle gun that supposedly can produce 2000NM of torque, your welcome to borrow it mate?

Quote:

---

Originally Posted by rusty_nail

not sure, what do you want to cut and ill let you know if i can cut it lol

---

Something to withstand engine bay temps. I wanna get a new sticker printed for the rocker cover like this one.
http://www.nissanpatrol.com.au/forum...018/10/621.jpg

Quote:

---

Originally Posted by rusty_nail

i have a rattle gun that supposedly can produce 2000NM of torque, your welcome to borrow it mate?

---

Holy shit lol, mine is apparently good for 380nm but it won't come close

Sent from my SM-G960F using Tapatalk

Quote:

---

Originally Posted by Winnie

Something to withstand engine bay temps. I wanna get a new sticker printed for the rocker cover like this one.
http://www.nissanpatrol.com.au/forum...018/10/621.jpgHoly shit lol, mine is apparently good for 380nm but it won't come close

Sent from my SM-G960F using Tapatalk

---

ill ask at the local supplier if they do high temp stuff. may be better cutting the reverse logo(as in the borders of the letters) then you spray painting high temp paint onto it?

i can send down the rattle gun if you like?

actually ask AB if hell pick it up on the way to sprocks bucks, are you going to that? if you can sort it out you can borrow it then, then return it when it works?

Thanks mate for the offer, MB has one as well and is already travelling through so we will give his a go!

Sent from my SM-G960F using Tapatalk

I have something that might get it done tio winnie, ill bring it down mate.

Cheers Daz!
This is where I am at now. Not a lot more to go.

I need to grind the crank hole out on my sandwich plate to fit the larger crank of the turbo motor.
Need to install fuel pump and the lines and injectors.
Flywheel and clutch
Vac pump when it shows up.
I need a couple of adaptors for turbo oil feed and a new drain hose.
Will need to get an oil feed hose made for the vac pump
I am going to relocate the vac canister to the drivers side.
5mm spacer to be made for the tacho sensor

http://www.nissanpatrol.com.au/forum...018/10/624.jpg

Sent from my SM-G960F using Tapatalk