What has made you Angry Today???????

Quote:

---

Originally Posted by filthyrich

opening doors/keeping them open for people when walking through. With no please thankyou or acknowlagment.

---

I just say "no worries, you're welcome" and smile when they look

Reading the post today that Scotty / BigRig has left the forum .

Quote:

---

Originally Posted by boots

Reading the post today that Scotty / BigRig has left the forum .

---

Yeah kinda sad huh! Bigrig if Ur lurking come back!!! We miss the smiles u bring to this forum!!!

Quote:

---

Originally Posted by NissanGQ4.2

Pretty sure it just on gas and mainly when you take your foot of the accelerator then put it back on ( giving it a little bit )

---

My guess is it has something to do with the airbox/intake. I think it has to do with the pressure of the air inside the intake when you are gassing is quite high, then when you lift off you are taking all the fuel out and mucking up the air fuel ratios. I know on real cars that are on gas, patrols, you need to fit an equalizing pipe to the intake to stop it doing that.

Quote:

---

Originally Posted by Winnie

This was found near O'Tooles camp ground. We were there just last weekend!

---

Not sure if this has already been said but you need to send this to 4x4 Victoria , they will let the right people know.

Did not make me angry but bloody hurt .

For those that use brushcutter and mower without protection take note, I have done many other things but yhis one was weird. .. it was just a small piece of weeds but went a full Centre meter into my shin.
Attachment 33748

Did not know it was there till I got home and god it hurt when I pulled it out.

Quote:

---

Originally Posted by Bloodyaussie

Did not make me angry but bloody hurt .

For those that use brushcutter and mower without protection take note, I have done many other things but yhis one was weird. .. it was just a small piece of weeds but went a full Centre meter into my shin.
Attachment 33748

Did not know it was there till I got home and god it hurt when I pulled it out.

---

Looks almost as bad as the paper cut I got at work today.

Oh funny. ..... so your risk of death at work is from a killer printer!!!

Quote:

---

Originally Posted by lhurley

when you are gassing is quite high, then when you lift off you are taking all the fuel out and mucking up the air fuel ratios.

---

It doesn't backfire when lifting the foot but the other way around.........back off then put the foot down.......BANG!!!!!!!!!

But could be the same thing, will start with leads, plugs and cleaning the maff sensor.

Maff sensor I dare say needs a good clean as when I bought it the air box was blown and there was no air filter there!!! Have replaced the air box and put a filter in.

Quote:

---

Originally Posted by Bloodyaussie

Oh funny. ..... so your risk of death at work is from a killer printer!!!

---

I do get to mine sites and building sites and climb the occasional tower but hurt myself more often in the office. (probably on purpose to stop the boredom)
Don't underestimate those killer printers, they know when your back is turned.