What did you do to your Patrol today!

All sorted, jars of turds enroute to the Hills [emoji736][emoji120][emoji106][emoji106]


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by MB

Little Buggers Cuppa Mate [emoji22]See if you can track down some FNQ Python [emoji216] Poo [emoji90]. Apparently if you hide it around your home or under your bonnet I imagine too, Rodents won’t come within a Cooee whiff [emoji1696] We got smashed in the Hills down here over winter by Rats, they took out Rossco’s GQ heater hoses and gnawed through my GQ brake master cap. Searching for some Vic-Pet Python Nuggets myself at the moment[emoji1696]


Sent from my iPhone using Tapatalk

---

We should've hung on to this fella for a bit longer when he visited a couple of weeks ago!

Attachment 85864

He’s Beautiful Cuppa Tea’s Legends [emoji3590][emoji106][emoji106]
Any chance He left some shedding behind, best turbo heat wrap for rodent dissipation I heard [emoji23]


Sent from my iPhone using Tapatalk

Nipped up the front wheel bearings and fitted Hub Saver Rings from Patrolapart. The rings are quite a lot beefier than I thought they were going to be.

Careful not to over torque them Craigstar, they are soft. [emoji120][emoji120]
Please don’t ask ‘exacts’ tonight but its about load carefully spreading across nip/nip/nip/nip… need my shed circa 25nm bookies but have a shocking memory [emoji22]

Sent from my iPhone using Tapatalk

‘Hub-Savers’ meant Brother, super soft, please be careful and spread their intended load evenly [emoji120][emoji106][emoji106]


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by MB

‘Hub-Savers’ meant Brother, super soft, please be careful and spread their intended load evenly [emoji120][emoji106][emoji106]


Sent from my iPhone using Tapatalk

---

Bugger. Torqued them to factory spec. Will inspect them tomorrow to see if they are toast. But I did tighten each bolt in a cross pattern, so should be ok.

Fresh engine oil and filters all 'round this morning. Weather is glorious...
Completely lost track of time, would you look at that ...
Attachment 86013

Cut 8mm off the ends of both brand new RCV cv and axles just purchased because they are supplied too long from the factory. Circlip groove has already been recut to suit the right location as well, Pretty disappointing to be honest. RCV knows about the issue but stil supplies them incorrectly, like WTF is the point, laziness.Attachment 86014

Preping the Patrol for Cape Jaffa. Once a year oil change, even though it hasn’t done 5k in a year, lol. And decided to spray the underbody with this just for some added protection against the salt water.
https://uploads.tapatalk-cdn.com/202...b4555c0786.jpg

Deodorised my ass! This shite stinks! I might have to do the rest on the day we leave. My garage really pongs!


Sent from my iPhone using Tapatalk