-
OK Gents this is just getting silly!!
If you don't have a set of ratchet spanners then these are a bloody bargain. Nearlly stealing them. If you do have ratchet spanners then these are perfect on the other side of the shed or in a Rol iin the car permanently.
I have this exact set as an extra set on the far side of my shed. Yes I have a problem but finding a ratchet spanner ain't one of them. This is a Great set. I have them and used them a dair bit. My go to set that I have had for over 10 years is also gearwrench.
http://www.nissanpatrol.com.au/forum...2023/05/14.jpg
Sent from my SM-G977B using Tapatalk
-
So I think I posted in here some time back about a New To Me Welder. I got it off FB Marketplace for about 20% of its retail value which was a steal. I have not done much in the shed for a link time and this is the second time I've used this welder. The first time was welding a body braxe on the GQ before Tassie which ended with my Car on fire and a total Loss of the Main Fuse board in the main loom in the driver side kicker!!! Was a bad day.
Well apprehensively I got out to the shed this afternoon and dialed in the welder for 5mm plate and vloodt Hell it's nice!! I wish I had it when I was building the bar work on the GQ as it's a World Better than the shitty one I had. Blame the tools I did and proved today that I'm not an absolute failure on a welder.
Welded up the top for my new Welding table and stoked with the outcome
http://www.nissanpatrol.com.au/forum...2023/10/11.jpg
http://www.nissanpatrol.com.au/forum...2023/10/12.jpg
http://www.nissanpatrol.com.au/forum...2023/10/13.jpg
http://www.nissanpatrol.com.au/forum...2023/10/14.jpg
http://www.nissanpatrol.com.au/forum...2023/10/15.jpg
http://www.nissanpatrol.com.au/forum...2023/10/16.jpg
http://www.nissanpatrol.com.au/forum...2023/10/17.jpg
http://www.nissanpatrol.com.au/forum...2023/10/18.jpg
Pretty happy with how it came up. Some grinding to flat on a couple but stoked
Sent from my SM-G977B using Tapatalk
-
1 Attachment(s)
I sold my Unimig Procraft 240 MIG welder and my Unimig 200 AC/DC TIG both on Marketplace and got decent money for both so I went shopping yesterday and picked up a Unimig 230 4 in 1 machine that replaces both previous units.
They threw in a good $399 helmet in the deal so I’ll keep it as a spare.
Attachment 87386
-
So I am a Facebook Marketplace animal. Bargain hunter. Fins stuff all the time ans a few members here have benefited from this lol.
Win for me. I have been searching Festool for a while chasing a Plunge Track saw. I stumbled on a HUGE Collection of Festool Pneumatic Air fitting ans couldn't pass it. Mainly 6mm stuff which could be handy in a car build. I now have a life time supplier of quality Festool fittings....
http://www.nissanpatrol.com.au/forum...2023/11/19.jpg
http://www.nissanpatrol.com.au/forum...2023/11/20.jpg
http://www.nissanpatrol.com.au/forum...2023/11/21.jpg
http://www.nissanpatrol.com.au/forum...2023/11/22.jpg
http://www.nissanpatrol.com.au/forum...2023/11/23.jpg
http://www.nissanpatrol.com.au/forum...2023/11/24.jpg
$50. Legit...... $50.. there has got to be $1500 with of fitting! More even
Sent from my SM-G977B using Tapatalk
-
-
1 Attachment(s)
I just want a bluddy welding helmet I can see out of. Good helmet but its way too dark even with a sheet load of lamps on my work.
Many years ago I bought a Unimig 250a mult purpose mig welder which packed it in. Apparently it was my fault because my 10A run was too far and should have been on 15A. Awe well. But I have to say support by Unimig is second to none. I was well out of warranty yet they reduced my fix it charge by 50%.
Anyway, while this welder was down, I bought an old clunker 180A mig which cave men would have used for $100. Yep, marketplace. Man is this welder smooth. The old fella who owned this fitted a huge fan to increase its duty cycle and it sounds like an old VW! It ain’t goin anywhere.Attachment 87517
-
Market place is so addictive! Morning coffee and bargain scroll ritual [emoji28]
.......from under the great down under.
-
Can’t be bothered searching above, potentially already posted these Great USA Vicey’s imported a year or so ago:
https://www.nissanpatrol.com.au/foru...2024/03/21.jpg
Shipped into Australia, (as Vice Grip-AU) doesn’t sell them yet [emoji22]
Brought/Bought 3 x (Small / Medium/Large)
Unbelievably Ridiculous Torque grip, truly leaving at home these days most other tools on Gnarly Lightweight required trips [emoji736][emoji3590]
FWIW AB Brother, they can grip the likes of say 5mm of an exposed diff nut [emoji1645][emoji123][emoji123]
Sent from my iPhone using Tapatalk
-
I want to buy a grease gun. I had one about 20 years ago and all I can remember is that more grease came out of it than went into the thing I was greasing.
Any recommendations, gotta be under $100.
-
2 Attachment(s)
I am using a pneumatic one. Very handy to just pull the trigger instead of pumping a lever single-handed while under the truck. And you can replace the grease fitting on the end of the hose (I haven't yet) with one that clamps to the grease nipple thing so you don't even need to hold the hose end.
Attachment 87872 Attachment 87871