Are you after a luggage box for the roof or an actual bin????? Try camping stores like bcf for the box or repco....... I'm sure there must be other places to. But if its a bin, as the others have said get one for the rear wheel.
Printable View
Are you after a luggage box for the roof or an actual bin????? Try camping stores like bcf for the box or repco....... I'm sure there must be other places to. But if its a bin, as the others have said get one for the rear wheel.
Hi All, Jut wondering if anyone has or knows of a GU steel bar to suit 04 DX ute. Mine is almost completely made of rust. roos are stronger than rust :-\
Thanks guys
Dave
when i bought my troll it only came with the jack, no crank for it, anyone got a spare one round the brisbane area?
Hi mate, sorry i don't have one, but just wanted to check if its a GU Wagon, and if it is, that you know the handle is actually stored under the back middle row seating , and not with the jack and tools ?
If you already know this, please excuse my post, as no way intended to insult your knowledge, its just i thought my jack handle was missing untill i discovered it by mistake under the back seat !
na i got a ute and i am guessing it mounts to the back wall on the clips, oh and my knoledge on patrols is non existant, i was going to get a toymotor but i found a deal on a troll i could not resist. anyone know if the utes and wagon cranks are the same?
Chasing the hoses for the Automatic Transmission lines to radiator oil cooler ( 1991 GQ ). If any one has a spare set or second hand ones in good nick they want 2 sell or know of where to get aftermarket ones from, please let me know.
Repco and Supercheap don't list them and Nissan said 6 weeks ex Japan :(
Cheers
Todd
Attachment 10165
Attachment 10166
Attachment 10167
Attachment 10168
Bursons, Nizzbits, Patrolapart, wreckers ... after that, auto transmission outlets for possible spares or known aftermarket replacements ..
hope you find em mate!!!
as an interim measure put in some straight tube ones - if any of the curves are too tight, coil wire around that part of the line to help it not collapse? Or make them a bit longer and get creative with cable ties to support against adjacent bits