Printable View
Ok here is a few shots of the real truck courtesy of Scotty's vid from Beerburrum.
The Pigtrol
http://www.ztcaustralia.com/4b/Pigtrol.bmp
http://www.ztcaustralia.com/4b//Downhill.bmp
http://www.ztcaustralia.com/4b//Uphill.bmp
http://www.ztcaustralia.com/4b//DropIn.bmp
Great pics Dave, Love this beast too. (bit bigger than the other)
Got some good fun goin on there in some awsome terrian.
Well done buddy, thanks for sharing the good times.
Enjoy.
Cheers Pete
Thanks Dave, one tough looking GQ you have there mate.
Yeah X2 with Doggy Dave, Tough looking Rig mate.
Thanks guys. We had to lower it a little to make it look as if it was not so high. It did have 7 inch lift dropped to 5 and a set of 37's on bead locks changed to 35' on Sunrasia's. Body looks a bit rough, but as we were told growing up "don't judge a book by its cover".
Added some new eyes to the pigtrol. But wanting some Lightforce or an LED bar. Just have to wait for Education Qld to finalize my retrenchment (only been 11 weeks without pay).
Yes I know my Number plate is displayed but who gives a rats. It can be seen in othe pics and vids.
Nice bar work! Did you or others do it or was it on when you bought it?
Looks great Dave well done matehttp://www.nissanpatrol.com.au/forums/
Not like you are not noticeable with sign writing any ways.....
The bar work was done by my mate at On Track 4WD Centre here in Bris.
Yes Tim is still in comp dress code ready to go comp again when I have the $$$$ and a navigator. You going to offer Tim?Quote:
Not like you are not noticeable with sign writing any ways.....
Nice work Dave, didnt notice before, but acually (dont laugh) Love the bonnet.
cheers Pete
Is a good idea to allow the fresh air in and hot out. But it's cracking around the base of the scoops. However I did not fit these, they were already on it when I got it. I bought the truck pretty much the way it sits. I have only added the lights and a floor (which still needs carpeting) in the back to cover the spare, the compressor and tank.Quote:
Originally Posted by wild98
Tough rig mate, bet you never get bogged
What can I say - I've seen it in action and it is a dead set weapon!!
Great truck and awesome bar work.
Here is the Pigtrol the day before I picked it up. It has the 7 inch lift and the 37's on bead locks. Wish I had kept the wheels on it.
They did look good mate ... but no loss when you think of how breezy you make most stuff look when you do it ...Quote:
Originally Posted by Dhuck
hmmmm notice no pics of the pig in the mud stuck LOL :P
no mate they were in the trip vid
About to go for a mud bath
http://www.nissanpatrol.com.au/forum...achmentid=6196
The missus takin it for a mud bath
http://www.nissanpatrol.com.au/forum...achmentid=6195
Getting bogged for something to do
http://www.nissanpatrol.com.au/forum...achmentid=6194
2 tie rod ends and a tyre. Whoops
http://www.nissanpatrol.com.au/forum...achmentid=6190
Really like your front bar mate, the one on the truck that is
Any tyre damage when it pops off on the last foter??
If you have watched the vids of our last trip to Landcruiser Mountain Park, we did a night run on Club Ralley Circut. We came down that hill after rolling the tyre of the rim on another easier track going up. Could not jack the truck up on the hill so decided to drive it back down and ended up taking the wrong track. Shredded the tyre and broke 2 tie rod ends
A pic of the hill
Nice pics mate, looks like you have a ball in that thing LOL
I try mateQuote:
Originally Posted by big_fletch
Quote:
Originally Posted by Dhuck
that definatly means businss!!!!
Would love those bits back.Quote:
Originally Posted by Ben-e-boy
Here we go thanks to Nick. A little footage from 4x4 TV. At about 12 mins in the show some highlights from the All Terrain Challenge held at Fairy Land (Landcruiser Park) last year. This is what the Pigtrol was doing just before it fell into my hands.
http://www.4x4earth.com.au/watch-4wdtv/?e=244
Good show Dhuck, even had short segment on leaf springs. Now go treat Pigtrol harder!
Tim
Just got a Chinese 7 inch GPS off ebay for the Pigtrol. Cost me $130 Buy now from Sydney and arrived in 3 working days and has preloaded maps. So far street nav is quite good but waiting to take it for a tour.
The Unit itself runs Window CE v6. I have 3 Nav programs on it. Garmin Mobile XT CE, iGo Primo and OzixplorerCE
The Unit
http://www.ztcaustralia.com/4b/off.JPG
http://www.ztcaustralia.com/4b/on.JPG
OziExplorer CE
http://www.ztcaustralia.com/4b/oziexplorer.JPG
iGo Primo
http://www.ztcaustralia.com/4b/igo.JPG
http://www.ztcaustralia.com/4b/igo2.JPG
Garmin Mobile XT CE
http://www.ztcaustralia.com/4b/garmin.JPG
http://www.ztcaustralia.com/4b/garmin2.JPG
Here is a link on ebay. The unit has gone up $10 since last week.
http://www.ebay.com.au/itm/New-7-GPS...item19cb860c13
Looks good for the money mate!Quote:
Originally Posted by Dhuck
Mate it looks like yer drivin through peoples back yards in the last photo hahahahahahahaha watch the road and not the little screen :-)
hahahahahahahahahaha.............................. .... GOLDQuote:
Originally Posted by growlers71gq
I was in the backyard lolQuote:
Originally Posted by growlers71gq
looks very nice... cool car...
The old girl is going through a bit of a change. She started life as someones tourer. She was then built into comp truck. Then it was my turn to own it. It had a 7" lift and 37's reduced down to a 5" lift with 35's and is now down to a 3" lift with 33's. Will add pics as I do the demodding.
When Purchased.
Attachment 43394
First run on 5" lift and 35's
Attachment 43395
I then added the roof lights and basket
Attachment 43391
I then put a fridge slide and drawer in the back but no pic
Now she is lifted 3" on 33's
Attachment 43392
Removed fridge slide and drawer. I also removed the on board compressor and tank
Attachment 43393
Will be removing the roll cage and replacing the dash and console. Moving the main battery (currently both behind back seat) back under the bonnet but clueless as to where I am putting the aux (either under the bonnet or in the new drawer system which will come). Will keep pics coming as I progress.
Looking to do very similar front and rear side scrub rails on my GQ too. Every time I take it out I cave in the bloody quarter panels. Can you tell me Dhuck how the side rails are connected to the front bar and sliders? Are they part of the sliders?
Thinking I need to remove my current sliders and make some new ones that incorporate the full length slider / scrub rails.
Interested in how they meet the rear bar also mate, I am thinking a second loop to the top of the tail lights at least then may be a new rear bar too....
If I do all that I might take the opportunity to remove the body lift while I'm there.
Can you also post a couple of pics of your internal cage mate? Do you have a B pillar hoop as well? Keen to see this if you have please.
Looks good. Like the 37s, most hard core guys are running 37s in Vic now, need to get onto some too.
Every thing is welded, gussetted and laminated, all 3.5 tonne of it....lmao. really it is, it wasnt designed to be removed without a grinder or an oxy or both......geneally both.........definatly bothQuote:
Originally Posted by MudRunnerTD
Quote:
Originally Posted by MudRunnerTD
Benny is right on the mark. I will be getting in there with a saw or grinder to get it out. I will knock up a quick drawing shortly as an idea of how it is.Quote:
Originally Posted by Ben-e-boy
Is a sad day. I watched the old Pigtrol drive out my driveway for the last time tonight. Never to return. But I still have the front locker, CrMo CV's, 3" lift transferred to the GU and put the 5" back in the Q and kept a couple of other goodies of the old girl.