rear diff not straight and panhard bush being pushed out

Hello,
I've put a 3" lift in about a month ago and had a knock come up about a week ago. Had a look to see the front panhard bush has started to come out, just not sure if there was a washer on the back between the panhard and the diff? Also the rear diff is sitting out of wack, one side is 35mm further back then the other side, one bloke said it's the control arm bushes and another said the rear panhard. Has anyone else had the same thing or know what's doing please?

Panhard's should only have a washer on the outside.

Control arm bushes can be inspected visually but 35mm is a big variation, check for bent control arms as well.
Panhards locate the diff's across the vehicle so are unlikely to be the cause of this problem.

Tony

Quote:

---

Originally Posted by YNOT

Panhard's should only have a washer on the outside.

Control arm bushes can be inspected visually but 35mm is a big variation, check for bent control arms as well.
Panhards locate the diff's across the vehicle so are unlikely to be the cause of this problem.

Tony

---

hay i thought that was right about the panhard it doesn't look like the bushes are stuffed or bent arm's