TD42 22mm injector socket

Hi all where can I buy the 22mm injector socket for the no1 injector .

Anywhere. Just go to a tool shop and get a deep 6 point socket. And just cut a slot in it with the grinder.

Sometimes you can get lucky and the screw that holds the wire onto the injector can be undone and a standard deep socket can go on then.

@Tip12345

You could also purchase a 22mm oxygen sensor socket as well. Which most decent tool shops should carry.

Quote:

---

Originally Posted by nissannewby

Anywhere. Just go to a tool shop and get a deep 6 point socket. And just cut a slot in it with the grinder.

Sometimes you can get lucky and the screw that holds the wire onto the injector can be undone and a standard deep socket can go on then.

---

Eh? I just bought a standard 22mm Deep socket. No grinding required. Did all my squirters, twice. Whats this screw and wire you speak of?

Quote:

---

Originally Posted by mudski

Eh? I just bought a standard 22mm Deep socket. No grinding required. Did all my squirters, twice. Whats this screw and wire you speak of?

---

On the TD42Ti there is a small sensor on the number one injector that senses the injector pulse. Its used in conjunction with some basic timing control of the pump and the emissions crap they put on them.

Quote:

---

Originally Posted by nissannewby

On the TD42Ti there is a small sensor on the number one injector that senses the injector pulse. Its used in conjunction with some basic timing control of the pump and the emissions crap they put on them.

---

Ah of course there is. Thanks.


Sent from my iPhone using Tapatalk