Oil filling made easy

Hi,

One from the MG nut but I know you guys with all the extra boxes might appreciate even if you've got more room than me.

How to change the oil in your Gbox, Dif etc the easy way.
(Not a new idea I stole it of the WWW but thought I'd share.)

Trip to the garden center for a weed sprayer.
http://www.nissanpatrol.com.au/forum...2011/05/22.jpg
(Don't trust the markings, I recalibrated, engraved with a dremel and paint pen. I don't use them for measuring the actual fill but more for a guide.)

Bit of bent pipe to go in.
http://www.nissanpatrol.com.au/forum...2011/05/23.jpg

Into the box in question, few pumps to get up to pressure pressure and then let it work.
http://www.nissanpatrol.com.au/forum...2011/05/24.jpg

No more long funnels or squrting in from the bottle.

Befoer next service I'm going to modifiy further to work as a pressure bleeder for brakes.

Hope you like,
Cheers,
Richard B.

Thanks mate - simple and effective!!

Good idea mate, make life alot easier

Quote:

---

Originally Posted by Plasnart

Great idea, but do you have a separate one for each oil or do you clean that one between oils?

---

Just the one (at the moment) and I change oil, a few drops of last grade doesn't hurt.
BUT I am giving serious consideration to a few so I'd have one each grade. If I had a bigger garage I would have more for sure.

Great idea!

I have a small pump bottle that only holds 500m and the tube keeps popping off..lol..Takes me a solid 30 minutes for each diff and a lot of swearing!!!

thats a great idea. i hope the boss doesn't chew me out when i steal her weed spray bottle

how does it go with the diff oil mate? i use LemSlip which is very thick...does it handle low viscosity oils ok?

Nice work mate, i like it....allot!

That is a good method, well done.
Here is another, very simplistic way. A funnel and some clean (new) garden hose.
As most oil bottles have measurement marks on them you can get very close, before pouring carefully. Or you can decant into an accurate measuring jug.
Also easy to do GB and transfer, just rig up through engine bay.

Attachment 5104

Attachment 5105

bl00dy good idea mate
im gunna modify my weed sprayer hahahahah
i wonder how the weeds are gunna like diff oil hahahahahaha

Quote:

---

Originally Posted by AB

Great idea!

I have a small pump bottle that only holds 500m and the tube keeps popping off..lol..Takes me a solid 30 minutes for each diff and a lot of swearing!!!

---

Too right! lol I know the feeling!