Hi
I'm replacing the front hubs and at least one sides bearings. I have Castrol HTB 2 for the bearings but I read somewhere the manual hub should be cleaned and lubed with 'general grease'; is this true? I assumed HTB as its all some same location. Further; what is the recommended lubricant for the sliding frame/bolts of the brake calipers?
Cheers
have a search for @MudRunnerTD DIY thread on wheel bearing replacement
Its very comprehensive and well worth seeking out
Quote:
Originally Posted by Jonesy_sa
It's here:Quote:
Originally Posted by threedogs
http://www.nissanpatrol.com.au/forum...Rebuild-Thread
Thank you for the great link however I could not see an answer to my two main question?
What grease for the manual hub gears and what grease for the sliding component of the brake caliper?
If I missed it which post number was this detail covered?
Manual hub gears I'd use a waterproof grease but it really only needs a slight coating don't glob it in
The caliper slides use caliper grease though I've heard people use high temp anti seize
Sent from my E6653 using Tapatalk
HTB for everything in the hub
Caliper grease for the slides (expensive) but worth it