Printable View
Hi Guys,
I just purchased a Provent (knock off) from eBay , obviously plumbing the inlet and outlet are simple , but im just wondering as the kit comes with no hoses, how anyone that has one went about blocking the 12.5mm drain hole.??
I was thinking maybe a clamp, piece of hose and a small ball valve or something similar.......any help or info much appreciated.
Cheers,
Ad.
Get some 1/2 inch hose and run it down the chassis rail. Put a ball valve tap on it so you can drain it with ease. Thats how I have mine. Its runs down in between the inner guard and chassis rail and sits over where the sway bar mount is on the chassis rail.
Same with mine.. easy to drain.. easy to see..
Yep, just the same. Extended down into the wheel arch area against the chassis rail, with a tidy external cap on the end.
i just went to bunnings and got a irrigation valve with barbed fittings moulded in for a couple of bucks , works perfect , never leaked a drop .
Sounds like a plan.....:wink:Quote:
Originally Posted by nipagu7
should do the trick
Attachment 66509
this is mine