Hi all I have most on the gauges wired in my 3 gauge pod ,but its lacking IMO a USB port
to power things like my DVR, or GPS, seems better than having leads running every which way.
I dont have much room so it would need to be a single outlet
Printable View
Hi all I have most on the gauges wired in my 3 gauge pod ,but its lacking IMO a USB port
to power things like my DVR, or GPS, seems better than having leads running every which way.
I dont have much room so it would need to be a single outlet
Maybe try eBay?
>>>tappin from tassie
Was hoping someone may have comeQuote:
Originally Posted by taslucas
across one already and could share a link
http://www.ebay.com.au/itm/131682208...%3AMEBIDX%3AIT
Found this one I'm going to trim it up and hot glue it in between
the clock and the RH gauge
Won't the guts from one of these fit?
http://www.nissanpatrol.com.au/forum...016/03/154.jpg
Saw them and dont have 35mm spare
its to fit between the clock and the Water temp gauge
Save yourself the pain and just use a usb adaptor plug and stick it in the accessories plug
yeah would be a lot easier, Ill wait and see.
cant put it in the second glove box a it wont close
and just look all wrong.
http://www.ebay.com.au/itm/351454052...%3AMEBIDX%3AIT
Found this stand alone USB port might look OK under the pillar pod, same as your link
but it has a base
Why not use a USB extension cord and just cut out the area needed to poke it through the pod and glue it in flush and then plug the other end in under the dash in one of the USB plugs you have already shown.