Who here has braced the front diff on their gq? If you have, how did you go with sump clearance? i have read that it may be an issue... my car has 2" suspension and 2" body lift
Printable View
Who here has braced the front diff on their gq? If you have, how did you go with sump clearance? i have read that it may be an issue... my car has 2" suspension and 2" body lift
should be right are you using 50 x25 x 3 RHS sliced on an angle.
You'll also need the small weld on piece for the ball knuckles
http://www.ebay.com.au/itm/Nissan-Pa...item27f69da341
Have braced my front and rear diff. Haven't had any clearance issues as yet.
http://img.photobucket.com/albums/v9...FAB9D426A7.jpg
Yep. Braced mine.
Made absolutely no difference to clearance as you brace the top side, not the bottom.
Here is a pic
Attachment 57014
did you remove to weld or do in sitcuQuote:
Originally Posted by biggqwesty
Yea did it when I had it all apart to do the rebuild.Quote:
Originally Posted by threedogs
Did you guys make sure it was straight pre and post welding?
Nope. Just winged it and hoped for the best. But the last wheel alignment shows that both wheels are almost at 0 degrees so all good.
How do you check for straightness?
Yep.Quote:
Originally Posted by nissannewby
And braced and kept heat even.