Going to look at a set draws which have been removed from a 2005 100 series Toyota.
Comes with all the barriers,fridge slide ect.
The wings seem to be the main problem, from the sites I have looked at
Just wondering if much drama to refit/modify complete unit to fit my wagon.
Any advice Please.
MudRunnerTD has a set from a 60 series I'm his GU, he said he just had to cut the wings down a little
100 into a gu the wings may be a bit narrow.
The they are a bolt on thing anyway to my understanding.
So I'd grab them if the price is right and simply make a set to suit the gu.
Yeah I have a set out of a 60 series. I fitted them to my dads 80 series and the side covers were about 20mm too narrow when I fitted the kit to my GUIV I had to trim them about 15mm each side and they are perfect.
Checking out this morning.
Will keep you up too date.
Thanks.
Picked up draws .
All fits ok ,need to cut wing panels.
Barrier no go but have genuine one.
Cradle and divider ok.
Fridge slide all good.
Mock fit all seems ok
Drill and bolt in place tomorrow.
Cheers.