I must say although these gauges are awesome and intimidating, I would love to have more modernish HUD stuff to monitor 4 temperatures and two pressures as they are distracting as well.
Is this possible?
Printable View
I must say although these gauges are awesome and intimidating, I would love to have more modernish HUD stuff to monitor 4 temperatures and two pressures as they are distracting as well.
Is this possible?
You can get left and right hand pillar pods from 4x4 Concepts that may suit your needs
I've always wanted to do a custom display with the following, and may do so one day when I work out what will work with the tb48 (apparently NOT OBDII).
http://www.4dsystems.com.au/product/uLCD_220RD/
Depending on how hard it is to get info out of the nissan diag port it wouldn't be _that_ difficult to code up a solution.
I have 9 gauges in a 3 pod pillar mount
all Autron Digital all 3 gauges within 1 gauge
Attachment 51918
Batt1 / Batt2 / Amps
EGT / Boost / cabin temp
Oil Pressure / Water Temp / Under bonnet temp
cleared a heap off my dash, and all are easy to read with a glance
if its blue - no problem
if its RED - problem..........
being a GQ it might be easier to fabricate a central rally style LED dash with a recall button on some functions if doubling
plenty of toggle switches
A another option is o use a ardunio board, write your own software to monitor your snesors
I have a 2 line lcd display sitting just in front / at the base of the taco that displays battery voltage, cabin temp, LPG gas level and estimated LPG range
Sounds very interesting!Quote:
Originally Posted by GQ TANK
However the Turbo gauge has a mechanical input rather than electrical?