Printable View
Gday.
I have been modifing my turbo while the motor is out. Started with the turbine housing. I removed alot of material and also opened the wastegate from 19mm to 26mm
Before
Attachment 51476
Wastegate port
Attachment 51477
After
Attachment 51478
Attachment 51479
what do you use for new Wastegate flap?
gotta do this to my xr6t as I put exhaust on and now it overboosts. port n enlarge the port will stop it
Great work mate looks very tidy!
What dremel did you use Bene?? Can you post a pic
Yeah I heard that it an issue with the xr6t's, my wastegate flap still covers the portQuote:
Originally Posted by matfew
A makita die grinder, then a dremel branded dremelwith a grinding stone then a 180 grit and 320 grit abrasive buffQuote:
Originally Posted by Alitis007
Sorry I meant to say tge bit, cheers for that! What do you expect to gain from this???
Are we going to see 40psi? Shot gun a ride in this beast again and do little red again ha that was fun
Nah no more boost, 'ill just keep it where it is for now then change it after seeing what kind of drive pressures I'll see with these mods
How come one of the long sides is not square benny ? , is that port matched to the manifold and you will make your own gasket ,or did you just go a bit wide, only ask as from the first pic the gasket internal long edge looks parallel on both sides ?, tis a nice finish anyway bud.
I went wide on the exhaust manifold. I painted and took the pic before double checking. Its all matched now
I have seen people use old valves from a cylinder head for this.Quote:
Originally Posted by matfew