Boost gauge help

Does the boost tee into the blue hose see pic any help please could not save to my proflie album?:1087:

Hey mate i am running the same setup on my own vehicle.. if by boost you mean the boost guage then yes, the blue line will have the boost pressure in it.. Just make sure the line is well sealed and doesnt cause a boost leak

^^^^what he said.

Tony

Looks like time to tell the wife Iam going to buy one boost gauge then onto the next one thanks big flech and ynot

I put the T-piece into the fitting on the intercooler pipe.

http://i758.photobucket.com/albums/x...10093Small.jpg

Tony

I did exact same as ynot above, works a treat

here is how i set mine up

http://i990.photobucket.com/albums/a...h_IMAG0297.jpg

http://i990.photobucket.com/albums/a...h_IMAG0299.jpg

http://i990.photobucket.com/albums/a...h_IMAG0300.jpg

The boost gauge sits on the pilar in front of the driver.

Like this

http://i990.photobucket.com/albums/a...h_IMAG0302.jpg


This setup was later modified when i put the Dawes and Needle valve in (more photos to come)

Did a good job there mate, top work:smiley_thumbs_up:

what is a "Dawes and Needle valve"???

Quote:

---

Originally Posted by GU4u

what is a "Dawes and Needle valve"???

---

Dawes and needle valves are what some of us fit to ZD30 (3.0l diesels) engines to manually control turbo boost. The computer normally controls boost on these engines but doesn't do a very good job. No relevant to 2.8 (RD28) diesels.

Tony